Rubbing compound polishing

Salutations comrades!

I have two Swedish razors that i bought on tradera (the swedish ebay). And they need a little polishing and honing. I just got Lynn's DVD (great vid btw) and he mentioned in the restoration section that you can use Turtlewax Rubbing compound but that the he didn't like the consistency, but I did find there is a liquid kind of the rubbing compund. What do you think about using turtlewax rubbing compound, the original or the liquid for polishing my razors?

I would want to use the Maas but it is impossible to obtain in Sweden, and i'm not very keen on ordering it from abroad with all the shipping costs.

I don't know about a liquid but I do use the green bottle Turtle Wax rubbing compound. Wouldn't go without it. It's one of my favorite restore ingredients. :D

Yep all 4 types are part of my arsenal The paste style in the little tubs of rubbing and polishing and the liquid style in the bottles....

Quote:

---

Originally Posted by gssixgun

Yep all 4 types are part of my arsenal The paste style in the little tubs of rubbing and polishing and the liquid style in the bottles....

---

Ok, which one do you think works best? I only need it to get the dirt off and the shine on.. one of them has some rust on it what should I use on this?

Thank you

Rust = sanding of some type.... I haven't found that miracle compound that takes off rust ...

If I had to pick one for cleaning razors it would be the pastes.....

Rawas,

Just pick up whatever metal polish/rubbing compound you can get locally. They all work fine but you and I may have a different preference and thus I might prefer Flitz, Maaz, Mothers Mag polish and so on and you might prefer a 3M liquid auto type rubbing compound. They are all pretty much the same in use... I've used 5 different ones and in the end they all seem to produce the same results. I might prefer a cream style if you insist on having my opinion but if all I could find was liquid, I'd not be the slightest concerned.

The comment about rust is correct, if you have to deal with rust/pitting and want it all removed, you will have to do some sort of sanding to remove it all as you have to remove the metal surrounding the pits if you want to make the surface smooth again. I have done both and I have left pitting on some blades because to me they are just users and as I could get the bottom of the fairly shallow pits rust free it wasn't worth the additional effort to me, the others had such deep pitting that I had to sand down to clean metal to avoid further rusting in the bottom of those pits.

Regards

Christian

Rawas,

Autosol is the metalpolish I use, I pick mine up at the local Clas Ohlson store.

Personally I think that Turtlewax PREMIUM rubbing coumpound is better than a lot of other options. It works extremely well. The premium is different than the other one though so make sure it is the premium. Also make sure it is the premium RUBBING and not premium POLISHING. They all look similar. Looks like this: Turtle Wax - Premium Rubbing Compound

Thanks for the Autosol reminder, Bjorn.... I remember seeing it in Norway when I lived there and I do have a tube of it here... works as well as the others.

As for the Turtle wax brand, here's what I found available in Norway... not quite the same... or is it?!?! Impossible to tell as packaging and descriptions change from market to market. Either should work fine.


http://www.autocare.no/imagebank/web200/10939.jpg


Regards

Christian

Quote:

---

Originally Posted by kaptain_zero

As for the Turtle wax brand, here's what I found available in Norway... not quite the same... or is it?!?! Impossible to tell as packaging and descriptions change from market to market. Either should work fine.


http://www.autocare.no/imagebank/web200/10939.jpg

---

I'd say it's definitely not the same. Turtle Wax's Rubbing coumpound (not the premium) in the US looks similar except it is mostly white I think. Similar container though. Also, since the writing is in English they would put the one extra word on it if that were the product. The premium is different enough to make a difference IMO, but as always- use what you have at your disposal and make it work.

Ok, I think I've gotten alot smarter when it comes to this subject, thank's guys!

Anyway I went out shopping earlier today and I got the following:
A Dremel-like machine, the construction is the same but it's way cheaper.
The felt polishing wheels
Turtle Wax Rubbing Compound the exact same as kaptain zero showed earlier, the only one available, it is the regular not the premium.

I think this will be good for me as I don't plan on getting too many older razors, I only bought them (cheap) to practice on honing so I don't ruin my new razor. But then I says to my self "Hey, since you already got the razors why not also polish them up and why not also use them?"
So now I'm just of to polish the beasts and turn them into beauties, I'll post some before and after pics later if I succed;)

And Thanks again guys!

Quote:

---

Originally Posted by Rawaz

Ok, I think I've gotten alot smarter when it comes to this subject, thank's guys!

Anyway I went out shopping earlier today and I got the following:
A Dremel-like machine, the construction is the same but it's way cheaper.
The felt polishing wheels
Turtle Wax Rubbing Compound the exact same as kaptain zero showed earlier, the only one available, it is the regular not the premium.

I think this will be good for me as I don't plan on getting too many older razors, I only bought them (cheap) to practice on honing so I don't ruin my new razor. But then I says to my self "Hey, since you already got the razors why not also polish them up and why not also use them?"
So now I'm just of to polish the beasts and turn them into beauties, I'll post some before and after pics later if I succed;)

And Thanks again guys!

---

You may want to go shopping again and get the following:
Protective eyewear.
Dust mask.

Quote:

---

Originally Posted by smythe

You may want to go shopping again and get the following:
Protective eyewear.
Dust mask.

---

Ohh..too late:o
But you're absolutely right of course thanks for your concern:nj

Ok so here are the results guys. The first two pics are before pics and the two last are after, what do you think of the results?

Attachment 16952

Attachment 16953

Attachment 16954

Attachment 16955

Mmmmm.... much better... good work man... those Swedish razors will make good shavers after a good honing. Let us know how the shave goes.

Quote:

---

Originally Posted by smythe

Mmmmm.... much better... good work man... those Swedish razors will make good shavers after a good honing. Let us know how the shave goes.

---

I'm still trying to get a nick out by honing like a maniac on the one to the razor to the left. And the other one is a wedge that has a warped blade as I found out recently. But I hope to finish the one with the nick soon.