Results 1 to 6 of 6
3LikesThread: Solid Domed Washers - again
LinkBack URL
About LinkBacksThreaded View
spazola 
-
11-14-2008, 02:38 AM #1Senior Member
- Join Date
- Dec 2006
- Location
- Burkburnett TX
- Posts
- 3,100
Thanked: 2392
Solid Domed Washers - again
Here is my variant on making solid dome washers. I use a 2-56 bolt and nut. The inside diameter of a 2-56 nut is just about right for a 1/16 rod. I use a portion of the tube out of a Bic ballpoint pen as a spacer to keep the nut away form the chuck. Basically I chuck the bolt in the drill and file and sand the nut to shape. Make sure you go in the tightening direction when you are filing and sanding.
CharlieLast edited by gssixgun; 11-14-2008 at 03:50 PM. Reason: asked by op
IndependenceRazor1 and JP5 like this.
-
The Following 7 Users Say Thank You to spazola For This Useful Post:
dnjrboy (11-14-2008), gssixgun (11-14-2008), JP5 (09-08-2015), Milton Man (11-14-2008), timberrr59 (11-15-2008), tumtatty (08-27-2011), Utopian (05-30-2011)
Reply With Quote