Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    May 2005
    Location
    US
    Posts
    79
    Thanked: 2

    Default Small nick on the blade

    Does honing fix a small nick on a blade? If not, what is the best way to even out the edge again? Can the str8 still be used with the nick? The nick is about a 1/2 inch in from the end opposite the tang. Thanks.

    Rob

  2. #2
    Senior Member uthed's Avatar
    Join Date
    May 2005
    Location
    Cook County, IL
    Posts
    512
    Thanked: 4

    Default Re: Small nick on the blade

    Quote Originally Posted by rktosa123
    Does honing fix a small nick on a blade? If not, what is the best way to even out the edge again? Can the str8 still be used with the nick? The nick is about a 1/2 inch in from the end opposite the tang. Thanks.

    Rob
    I, personally, wouldn't use it with the nick .... The blade needs to visit a hone and the edge can probably be made perfect again in short order. In the two-hone, Norton combination system, for instance, stay of the coarser 4k side until the nick is gone, then polish briefly on the 8k side before a plain leather stropping. Ironically, an older razor often performs much better after the nick removal, since it has a nice new bevel and polish to its edge.


  3. #3
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4942
    Blog Entries
    2

    Default

    I usually use a circular motion on each side of the blade in incriments of 20 circles until the nick is out. With the edge to you, use a counter clockwise circle and with the edge away from you, use a clockwise circle. I do this on the 4K side and then when it is gone, I switch back to the X pattern for finishing. Lynn

  4. #4
    Senior Member
    Join Date
    May 2005
    Location
    Boston, MA area
    Posts
    226
    Thanked: 17

    Default

    Glad you mentioned the 'circular motion', Lynn! I do the same thing for small nicks ...sometimes a hone courser than 4K is needed, but it seems that the circular pattern really reestablishes a straight edge and a consistent bevel again quickly.

    Thanks for explaing the clockwise/ counterclockwise stuff again ...I do it, but now will be sure to! Makes sens, considering the fin angle we are creating!

    Best,

Similar Threads

  1. Bummer Nick
    By imported_AFDavis11 in forum Shaving with a Straight Razor
    Replies: 2
    Last Post: 06-14-2005, 04:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •