Printable View
i'd like to be able to clean my ebays up to a nice standard i use mass polish and a good rub but does'nt quite get there. What do i need i no i could do with is it a dremmel . where could i get one from and also the differant clean aabrasives such as paste etc is there a kit and dremmel i could buy with every thing i'd need?
There are others that are far more knowledgeable about this topic than I but this is a good place to start.
Hand sanding a blade - Straight Razor Place Wiki
hth,
Kent
Gary,
you could buy a dremel and use the felt pads. The turtle wax rubbing compound is a must have. You could buy some rouges but they work better on a real buffer/polisher with bigger wheels. But they can work on the smaller Dremel felt pads. Black emery, stainless, white and green are mostly used.
As to which Dremel to buy, that's a personal choice and budget one too. Make sure it can go as low as 5000 rpm and powerful enough. I don't know where you are located but a google search can help as to find a reliable store.
As always be safe when working and using a Dremel.
right if i was to get a dremel ,for polishing i would need felt pads . If i was removing a little rust or tarnish what atachmant would i need?
Gary
I have been looking at getting a dremel as well, I was probably gonna go for the 400, it goes down to 5000 rpm, the 300 I believe does not adjust that low, not sure about this though, just from reading specs.
Some of the places I was looking at:
Beesleys Tool Shop UK
Dremel-Direct Jaymac (Derby) Ltd
I think even argos does one but it is only a stylus model and this might not be any good. Let me know if you stumble across a good deal.
Regards
Rob
If you're getting a rotary tool you might want to consider this one.
Amazon.com: Black & Decker RTX-6 2 Amp 3-Speed Rotary Tool with 30 Accessories and 2 Spring Clamps: Home Improvement
Its a 2 amp VARIABLE speed (I don't know why it says 3 speed) rotary tool that costs half of a comparable dremel one. It says the lowest setting is 12,000, I don't know if thats right, but it works fine for me. It accepts all attachments dremel makes. Has 5 yr warranty.
Rust can be gotten off with a wire wheel, tarnish responds well to radial bristle disks. Buffing wheels work ok, also.
Baldor 3/4 HP 1800 and 3600 RPM. Sisal, Spiral Sewn, Loose cotton wheels. 4, 6 and 8 inch. Greaseless compounds. Black emery, stainless steel, white and green rouges.Quote:
Originally Posted by Proraso Man