Funny - nobody so far is actually using a chasing hammer. The only person who even mentioned one is Glen.
So it sounds like I could start with a 4oz ball pein hammer, polish the faces and get a small anvil.
Printable View
Funny - nobody so far is actually using a chasing hammer. The only person who even mentioned one is Glen.
So it sounds like I could start with a 4oz ball pein hammer, polish the faces and get a small anvil.
I just spotted this 4oz ball pein hammer from the UK. The think that I like about it is the lenght of the heads. I would assume this would give you more visability when the face meets the pin. Maybe I'm wrong.
Here is the e-bay link to it.
T254204 TRIDENT HAMMER 4OZ BALL PEIN - eBay (item 180448140392 end time Sep-18-10 08:23:45 PDT)
Any thoughts?
http://my.frooition.com/080815/images/T254204%20(1).jpg
I use a standard 2 or 4 ounce chasing hammers, with a small 6" anvil.
try this website, and don't blame me for your drooling issues. :)
Rio Grande - Search Our Categories.
Just a thought to remind folks that you get what you pay for. A cheap "machined" steel hammer will polish up well. A cheap cast iron hammer will have shrunk and the axis of the hammer may have pulled apart leaving a coarse grain structure which does not take a good polish. That center may also crumble.
The better the polish of your hammer, the better the finish on the pin.
I spent a couple years working in the art metal department of a college and one of my jobs was renewing hammers, anvils, and stakes.
~Richard
Here's the one I use: Amazon.com: Starrett 815 Toolmakers Hammer with Built-in Magnifying Lens: Home Improvement
A bit expensive for a hammer but it is part of my Tool and Die Maker's tools and used on the job back when.
That is near Identical to mine,, TY John
Premium Chasing Hammer
That is my shop hammer but keep in mind I use it for more than just peening pins..
For finish peening I use this Starrett #815
http://www.starrett.com/download/325_p413_415.pdf
These are not cheap and they are also not needed for doing this work...
That $15 dollar Chasing hammer on the site John linked would be more than fine... Any of those Hammers will work just so long as Geezer mentioned you can polish the Ball...
I prefer the 2 oz, I feel it gives me more control and easier to work with. I even used a large bearing steelie in a pinch once.
the 4 and 2 from Rio are my go-to pinning hammers. They are machined from good steel, are on nice handles, and come with a good satin finish that will easily polish up to mirror. If you are on a tight budget I am of the opinion that the 4oz model is all you would ever need for pinning.
Gentlemen,
Ok I think I have settled on this chasing hammer from Rio. It is a 3oz - right between the 2-4oz range. It looks well polished and for my first pinning hammer I would hope get me started.
Thanks for all of the great input - I really appreciate it.
David
Chasing Hammerhttp://www.riogrande.com/MemberArea/...ers/112225.jpg