GEORGE WOSTENHOLM blade etching

[bishpick1]

I have a GEORGE WOSTENHOLM and Son Washington Works celebrated IXL that originally had an etched blade. what i can still make out says "The Damascus". I'm trying to find someone who has an image of the original etching, I want to re etch the blade after I finish the restoration.

[holli4pirating]

Is it one of these? http://straightrazorpalace.com/works...-damascus.html

[Joe Edson]

Is it one of these? http://straightrazorpalace.com/works...-damascus.html

I just cleaned up this exact same razor for my personal collection. I didn't dare touch the Damascus portion with greaseless or sanding of any kind. I just spent awhile with black emory and it shined it right up. There was some slight pitting remaining, but I would rather have that than loose the blade etch and damascus pattern. I'm not even sure they are damascus or just made to look like it with the swirls (ala the wonderedge tang).

For the spine and tang I tape up the blade with electrical tape and carefully hit those with greaseless and emory. Turned out great (and one I've been meaning to post in the restoration forum).

[bishpick1]

these aren't the best but this is the razor. it has a pre 1845 monkey tail, it's a wedge, and a very shallow barbers notch. I tried to get a pic of the remaining etching but it's not going to work with my cell phone. I'll try to get better pics when I get home.

Wostenholm pictures by bishpick1 - Photobucket

[ScottGoodman]

For what it's worth, I only use the tumbler method on etched blades...

After looking at the blade...your best bet may be to just slick up the blade and enjoy it with all the pitting. Don't get me wrong, it's a nice blade but needs the pitting taken care of before you entertain much else...

[bishpick1]

I know I will have to polish the blade before etching restoration, but what appears to be pits aren't. That is what remains of the etching, it was reverse etched (Polished lettering with the full blade etched) similar to this one. but much more elaborate. this is why I want the image of the original etching, it's just to rare to not try. "The Damascus" is written in a banner near the barbers notch, it has three large letters in the center of the blade one of which I believe is a "B". I've seen on-line that Wostenholm produced catalogs with drawings of their razors i was in the hope that someone here would have some of these catalogs in their collection and might look and see if they have this particular one. it is the only Wostenholm I've ever seen with "The Damascus" I've seen several with just Damascus. maybe that will make it easier to find, maybe harder.


STRAZORS.com - all about classic razors - George Wostenholm & Sons, Sheffield. (12th picture down)

[eTom]

Don't steal Alex' pictures!

[bishpick1]

sorry didn't intend to steal only to show an example. no offence intended.

[ScottGoodman]

I didn't mean to offend you, only to state that you will need to start with a clean slate to get where you are wanting to go.

[bishpick1]

I took no offense just thought I should explain a little better, after all the better I explain the more likely I am to get help. I'm trying to reproduce as much of the etching as I can in a drawing, and hope to post the image sometime tomorrow. I don't know if anyone will be able to provide what I'm looking for because I seen several of the more common etchings, even some of the more rare ones, but I've never seen anything like this. I've re etched a few blades successfully but this has so much detail I'm not sure I can do it my self. even if I find it I may have to send it to be photo etched.

I'm also more than a little excited about the possibility of saving this one.