Is this razor a lost cause?

So I got this razor a while back.. it has a HUGE chip by the stabilizer piece, it also has some pitting and devils spit along the bevel. can it be reground to have a shape to incorporate the chip (if you get what im saying) i have a pic attatched of the blade and a thiers issard with a shape similar to what im talking about.. thanks yall! i really want to try and save this bad girl! (sorry for the bad pics) Attachment 75083Attachment 75084Attachment 75085

Shouldn't be a problem. Good luck.

Looks tricky, you will end up with one heck of a smile, or a small blade. I can see why you want to save that blade, very nice.

Good luck.

I have seen a bunch of photos where people grind out the shoulder, kind of like extending from the tang forward. It doesn't appeal to me personally, but it's something that can be done. Search Pimp my Kropp for one example.

Yes, re-shaping the heel area of the blade should work fine IMO. Provided you know what your doing.
As for the Swiss cheese bevel edge of the blade, I would just hone with a lower grit hone and see if you can find clean steel
Grant

Quote:

---

Originally Posted by baldy

Yes, re-shaping the heel area of the blade should work fine IMO. Provided you know what your doing.
As for the Swiss cheese bevel edge of the blade, I would just hone with a lower grit hone and see if you can find clean steel
Grant

---

+ 1 to what Grant said. That should be your first move. Until you find that the bevel won't fall apart as you hone there is no point in reshaping the heel. Good luck with it.

thanks yall.. i need to get myself some stones asap... -.-