Thread: Restoration needs...

Ok, maybe this should go under the newbie section... but im leaning more towards here.

What sort of tools/equipment do I need to make scales and restore blades? I know I need bills CD! Anything else? What kind of investment am I looking at making to be able to creat scales and restore razors? Thanks

At the bare minimum...

Tools:
Rotary tool (drum sanding bit, drill bits, cutting wheels)
Coping saw (more money: scroll saw)
various sandpapers (150-600grit for satin finishes, up to 2500grit for mirror)
tablespoon (but a decent light peening hammer would be much better)

A stationary beld sander & bandsaw aren't neccessary, but will make things much easier.

Supplies:
1/16" brass rod (for pins)
#0 size washers
3/32" brass rod (optional, if you want bushings)
scale material (ie. some wood and CA for the finish)
metal polish (flitz, simichrome, MAAS, etc.)


And above all... time and patience. That's about all I can think of off the top of my head; there also much more that can be usefull and make things easier.

I'll add #0W washers for inner use.

You may also need a blade to work with. A drill press would help, but not necessary.

I forgot to mention abrasive flap wheels in 120/240/400 grit. They will get you well on your way to a nice satin finish. Ok on their own but they can be improved on by using radial bristle disks.

Hmmm, I haven't even looked at pricing this stuff, but im guessing its a pretty good lick?