Thread: Need help - identifying wood :)

Ok your welcome to get out any jokes about identifying wood now and apologies if I'm in the wrong section of the forum but I couldn't see a better place to post.

But I need a little bit of help identify a plank of wood that I recently acquired, I know there are certain types of wood that shouldn't be used for scales so I'm hoping this isn't one of them.

Apologies for the pics but it's the best I can do with the lighting available right now.







Its just about perfect in thickness to be ripped into two thin lengths each two foot long, it has the ability to become a lot of razor scales lol, plus. It was free so if I stuff up making scales then I've lost nothing but some time.

Any help would be appreciated.

Oh Boy you are sure limiting all of our senses to just ONE hehehe

Using just that one, my first impression is Cedar but that is a huge WAG

Looks cedar-like to me as well,though I've also seen some cuts of red oak with similar grain.

Thanks guys I've been looking online for some pics and it seems to match the suggestion of it being cedar, which is not on the toxic wood list so I think I might have ago at ripping it down for some scales.

On another note I noticed oak is on the toxic wood list is that to say it shouldn't be used for scales as a guide or does it mean that special precautions should be taken when sanding etc ??

As I was once sent a set of oak blanks from a member on here to have ago at making scales with, but am a little concerned that this might not be a good idea now.?

Just because a wood is considered "toxic" doesn't mean it is poisonous. As long as you wear a resperator/dust mask and safety glasses, you should be able to work with just about any wood. The "toxicity" occurs while it is being worked for most woods.

Gotta think philippine mahogany,whatever it is looks far to pithy for scales.

Originally Posted by pixelfixed

Gotta think philippine mahogany,whatever it is looks far to pithy for scales.

+1, thats my vote also

Charlie

If you’re looking for cheap exotic wood, look at old pallets, especially ones from out of the US. Many are made from oaks and mahogany and at times figured nicely, once cleaned up. Often you can find broken pallets in or next to the trash bins.

Take a small hand plane with you & be amazed at what you’ll find. I know a guy, who makes some beautiful picture frames from re-claimed pallet rack wood.

One of the things I do is search thrift stores for broken wood statues. You can buy a chunk of Ironwood or even some rosewood for a buck or two. I can get a gang load of great scales from a busted up carving.

If it is Cedar (or any other soft wood) it needs to be hardened to use as scales, Cedar is a very soft wood, I would at the very least give the scales a good soaking in a sealer/hardener, then after it dries re-sand and apply a good hard coat finish.

JMHO

g

Well it's good to know that the list is more for the prep work of the wood than actually using the wood as scales . If anything the plank will be a good start for me to get to grips with making scales as throughout my history my ability to work with wood has been poor at best the last thing I want todo is ruin some perfectly good oak that has a history to it and is fairly old.