Results 1 to 10 of 11

Hybrid View

zepplin Question about using pastes 04-28-2008, 04:46 PM
Seraphim It would only be considered... 04-28-2008, 04:50 PM
zepplin LOL, LOL, LOL! .....and... 04-28-2008, 04:57 PM
Wildtim I tend to use water to wipe... 04-28-2008, 06:12 PM
zepplin Now you've really got me... 04-28-2008, 07:16 PM
  1. #1
    A Newbie....Forever! zepplin's Avatar
    Join Date
    Apr 2007
    Location
    Nampa, Idaho
    Posts
    783
    Thanked: 77

    Default Question about using pastes

    Stropping with linens and pastes has now become a regular part of my maintenance program with my razors. - and, it's working quite well!

    I read once, a while back, that we need to clean the edge of our razor after we hone/strop with pastes. I do that. After using paste, I take a cotton ball, saturated with isopropyl alcohol, I brush/wipe lightly the edge at a 90 degree angle, 3 or 4 times. I then wipe/dry with tissue and start stropping.

    Weather I am supposed to do this or not, everything is working just fine. I'll continue to do this no matter what. I feel it's a good thing to do, and it feeds my OCD's.

    Is this the accepted thing to do?

    Steve

  2. #2
    < Banned User >
    Join Date
    Feb 2008
    Posts
    3,763
    Thanked: 735

    Default

    It would only be considered OCD if you cleaned the edge with above mentioned method, and then proceeded to inspect for cleanliness via microscope.

    As it stands now, you are just nuts, not really crazy.

  3. #3
    A Newbie....Forever! zepplin's Avatar
    Join Date
    Apr 2007
    Location
    Nampa, Idaho
    Posts
    783
    Thanked: 77

    Default

    Quote Originally Posted by Seraphim View Post
    It would only be considered OCD if you cleaned the edge with above mentioned method, and then proceeded to inspect for cleanliness via microscope.

    As it stands now, you are just nuts, not really crazy.
    LOL, LOL, LOL!

    .....and what makes you think I haven't done that? I just didn't think I needed to mention it.

  4. #4
    Cheapskate Honer Wildtim's Avatar
    Join Date
    Nov 2006
    Location
    A2 Michigan
    Posts
    2,371
    Thanked: 241

    Default

    I tend to use water to wipe the razor then I dry it off before stropping but other than that....

    It's always necessary to clean off one grit before going to a smaller one. I clean between the 4000 and the 8000, the 8000 and my finishing stones or strops, and between my finisher and my hanging strop, I even wipe between the linen and the leather even though my linen isn't treated.

  5. #5
    A Newbie....Forever! zepplin's Avatar
    Join Date
    Apr 2007
    Location
    Nampa, Idaho
    Posts
    783
    Thanked: 77

    Default

    Quote Originally Posted by Wildtim View Post
    I even wipe between the linen and the leather even though my linen isn't treated.
    Now you've really got me thinkin'!

    In order it goes like this: 1" very soft linen, 2-1/2" TM's Genuine Linen, TM's 2-1/2" Red Latigo, then finish with TM's 2-1/2" #1 Horsehide

    * I don't really feel the need to clean between these components. - unless one of you think I should. come on..... "Speak up!"

    Does this mean I'm not as obsessive and compulsive as I thought?

  6. #6
    There is no charge for Awesomeness Jimbo's Avatar
    Join Date
    Aug 2006
    Location
    Maleny, Australia
    Posts
    7,977
    Thanked: 1587
    Blog Entries
    3

    Default

    I don't know man - two linens followed by two leathers? You're pushing the boundary there

    If you start feeling the need to switch the lights on and off 20 times between passes, then you should worry I think.

    James.
    <This signature intentionally left blank>

  7. #7
    JAS eTea, LLC netsurfr's Avatar
    Join Date
    Sep 2006
    Location
    Burke, VA USA
    Posts
    1,301
    Thanked: 110

    Default

    [QUOTE=zepplin;203764]Now you've really got me thinkin'!

    In order it goes like this: 1" very soft linen, 2-1/2" TM's Genuine Linen, TM's 2-1/2" Red Latigo, then finish with TM's 2-1/2" #1 Horsehide

    QUOTE]

    Doesn't everyone do this? C'mon now... you all are holdin' back!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •