Results 1 to 10 of 16
Thread: Not a piece of wood
-
04-24-2009, 07:46 PM #1
Not a piece of wood
This is how it was advertised:
Two layers, thin fine lighter one, thicker coarse dark one, woodgrain pattern, wood box, 'soap stone' - naturally my mind wandered to the possibility of a vintage Belgian. Just the strange deep hollow in the would-be BBW side was a bit odd. Then again, people maltreat their hones in every possible way. At less than 5 Euro well worth a try.
Then it arrived, looking like two red bricks glued together. But look what appeared after initial cleaning:
-
04-24-2009, 07:48 PM #2
And now after sweating out some oil in a hot oven, soaking and scrubbing with BioTex, and lapping I have this beautifully grained Yellow Dalmore:
It doesn't show on the pictures, but in real life it has a nice crystalline sparkling too, and a wonderful silky touch.
-
The Following 6 Users Say Thank You to Oldengaerde For This Useful Post:
hi_bud_gl (04-27-2009), JimmyHAD (04-24-2009), joke1176 (04-27-2009), McWolf1969 (11-03-2009), Smokintbird (09-05-2009), Utopian (04-24-2009)
-
04-24-2009, 08:49 PM #3
Wow, I've never seen a hone quite like
that. Nice job on bringing it back to life!
How well does this work on razors?
- Scott
-
The Following User Says Thank You to sebell For This Useful Post:
Oldengaerde (04-27-2009)
-
04-24-2009, 09:04 PM #4
From the caterpillar to the butterfly ! Beautiful job of cleaning that up. Thanks for the great photo progression.
Be careful how you treat people on your way up, you may meet them again on your way back down.
-
The Following User Says Thank You to JimmyHAD For This Useful Post:
Oldengaerde (04-27-2009)
-
04-24-2009, 09:10 PM #5
- Join Date
- Jan 2008
- Location
- Rochester, MN
- Posts
- 11,544
- Blog Entries
- 1
Thanked: 3795That is an amazing progression with a beautiful stone in the end. The grain is very striking.
Can I have it?
-
The Following User Says Thank You to Utopian For This Useful Post:
Oldengaerde (04-27-2009)
-
04-24-2009, 09:37 PM #6
- Join Date
- Feb 2009
- Location
- Berlin
- Posts
- 1,928
Thanked: 402Wonderful!
-
The Following User Says Thank You to 0livia For This Useful Post:
Oldengaerde (04-27-2009)
-
04-24-2009, 10:03 PM #7
- Join Date
- Feb 2008
- Posts
- 766
Thanked: 174Great looking hone and well done in bringing it back from the dead.Very skillful.
-
The Following User Says Thank You to English For This Useful Post:
Oldengaerde (04-27-2009)
-
04-24-2009, 10:40 PM #8
- Join Date
- Sep 2007
- Location
- Manchester, UK
- Posts
- 95
Thanked: 11Nope. I'm not having it! I still think it's a lump of wood.
Connor
-
The Following User Says Thank You to Rosco For This Useful Post:
Oldengaerde (04-27-2009)
-
04-27-2009, 10:04 PM #9
Wow, that REALLY does look like a hunk of wood. Have you tried a razor out on it yet? I'd really be interested to see how it performs.
It was advertised as a 2-sided hone, and it looked artificial at first, but it turned out to be a natural. My question is: do both sides feel different? Is the 2-sided/layered appearance just due to the natural grain and both sides perform the same regardless? Just curious!
Thanks for posting the pictures.
-
The Following User Says Thank You to StraightRazorDave For This Useful Post:
Oldengaerde (04-27-2009)
-
04-27-2009, 10:11 PM #10
Very interesting stone. It's also interesting since you categorize the surface as having a silky quality. The Dalmore Yellow I have is not silky, it's on the coarse side and has a characteristic sandstone nature to it.
Would you rate the stone here as falling into a broad category of coarse, medium, fine or polishing (super fine) grit?
Thanks for posting the pics.
Chris L"Blues fallin' down like hail." Robert Johnson
"Aw, Pretty Boy, can't you show me nuthin but surrender?" Patti Smith
-
The Following User Says Thank You to ChrisL For This Useful Post:
Oldengaerde (04-27-2009)