Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1
    Senior Member blabbermouth hi_bud_gl's Avatar
    Join Date
    Nov 2005
    Posts
    4,521
    Thanked: 1636

    Default for randydance062449

    Randy this is a little late but the best picture's i could take. Please check broken edges . i did take pictures as close as i can. edges very sharp will cut hands and stone will not scratch with nail .Scratches on the hone made 150 diamond plate. very heavy i should say may be 5-6 pound will weight when i can. hope this helps all including myself to resolve this hone.
    Attached Images Attached Images         

  2. #2
    Hones & Honing randydance062449's Avatar
    Join Date
    May 2005
    Location
    Saint Paul, Minnesota, United States
    Posts
    8,023
    Thanked: 2209
    Blog Entries
    1

    Default

    Thanks for the pics! I really like that hone, I am glad you won that auction.

    Do you find that the effectiveness of the hone changes when you lap it with different grits? I would suspect so. I have been reading some of the threads here on SRP about sedimentary vs. monolithic type stones and they make sense to me, but, as always, each hone needs to tested in actual practice.

    This would be a company would be a good starting point for lapping that beast!

    Hand Lapping Polishing Plates - Lapmaster
    Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin

  3. #3
    Hones & Honing randydance062449's Avatar
    Join Date
    May 2005
    Location
    Saint Paul, Minnesota, United States
    Posts
    8,023
    Thanked: 2209
    Blog Entries
    1

    Default

    Thanks for the pics! I really like that hone, I am glad you won that auction.

    Do you find that the effectiveness of the hone changes when you lap it with different grits? I would suspect so. I have been reading some of the threads here on SRP about sedimentary vs. monolithic type stones and they make sense to me, but, as always, each hone needs to tested in actual practice.

    This company would be a good starting point for lapping that beast!

    Hand Lapping Polishing Plates - Lapmaster
    Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin

  4. #4
    Senior Member
    Join Date
    May 2008
    Posts
    289
    Thanked: 46

    Default

    that looks like jasper as prior to another x hone thread.

  5. #5
    Picky Bastd Smokintbird's Avatar
    Join Date
    May 2009
    Location
    Austell, GA
    Posts
    111
    Thanked: 36

    Default

    It's just my opinion, but it looks a LOT like the hones quarried out of southern Indiana in the mid 1800s...the ones that are found as grave stones mostly.....I went to one of those grave yards a few months ago while in Indiana and that looks more like them than anything else I have seen, but without holding them side by side I can't be sure of course...

  6. #6
    Senior Member blabbermouth hi_bud_gl's Avatar
    Join Date
    Nov 2005
    Posts
    4,521
    Thanked: 1636

    Default

    Quote Originally Posted by Memorael View Post
    that looks like jasper as prior to another x hone thread.
    i couldn't find another x hones . i find x hones and none is similar to this one. we had most people said it is most likely grave stone.

  7. #7
    Senior Member kevint's Avatar
    Join Date
    Mar 2008
    Posts
    1,875
    Thanked: 285

    Default

    From Roy Underhill's potential sources for home made whetstones. compiled from L.S. Griswold 1890 geological survey.

    "There is a novaculite in Lincoln County on a low hill.....It is straw colored to grennish white.

    Seems more likely than jasper??

    As I said in another thread the Hindostan is a very fine grained compact sandstone: info sourced from the above
    Last edited by kevint; 09-03-2009 at 12:22 AM.

  8. #8
    Senior Member kevint's Avatar
    Join Date
    Mar 2008
    Posts
    1,875
    Thanked: 285

    Default

    If you should read the original text you will find the term Novaculite is not a scientific term or limited to Arkansas stone.

    While Orange stone is compact it is classed as a sandstone. Those which produce concodial fractures, show transparent edges are novaculites.

  9. #9
    A_S
    A_S is offline
    Only the paranoid survive A_S's Avatar
    Join Date
    Jun 2006
    Location
    Oxfordshire, UK
    Posts
    349
    Thanked: 232

    Default

    Quote Originally Posted by kevint View Post
    From Roy Underhill's potential sources for home made whetstones. compiled from L.S. Griswold 1890 geological survey.

    "There is a novaculite in Lincoln County on a low hill.....It is straw colored to grennish white.

    Seems more likely than jasper??

    As I said in another thread the Hindostan is a very fine grained compact sandstone: info sourced from the above

    Would you happen to have a link to the Underhill article you mention?

    Regards,
    Alex

  10. #10
    Senior Member kevint's Avatar
    Join Date
    Mar 2008
    Posts
    1,875
    Thanked: 285

    Default

    That's just a page and a half in the The Wood Wrights Companion.

    Which is no online as far as I know.
    Here is the original text:
    Annual report of the Geological ... - Google Books.

    Roy's compilation is much quicker to reference, but it is not nearly as interesting as the Whetstone Geological report.

  11. The Following User Says Thank You to kevint For This Useful Post:

    A_S (09-04-2009)

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •