Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Senior Member Traskrom's Avatar
    Join Date
    Apr 2009
    Location
    Moscow, Russia
    Posts
    590
    Thanked: 124

    Default Can you get GREAT result with nagura and AVERAGE Jnat stone?

    Usage of Jnat's together with proper naguras gave me absolutely great result which I, honestly, don't even expected. However one question still bugging me. What is more important, great stone or real nagura? Ideal combination would be both, that for sure. But can you get the same result with just average stone and proper nagura? Any ideas?

  2. #2
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    how do you know that your jnat is average?
    As far as I know no nagura is that fine.
    Stefan

  3. #3
    Senior Member Traskrom's Avatar
    Join Date
    Apr 2009
    Location
    Moscow, Russia
    Posts
    590
    Thanked: 124

    Default

    I am not talking about stones that I have. I am absolutely happy with them. I am thinking about what if instead of shoubu or nakayama I bought something like Shouhon-yama (正本山) and used nagura with them. Those stones relatively "cheap", but can you get great result? What is more important, stone itself or nagura?

  4. #4
    Senior Member blabbermouth JimR's Avatar
    Join Date
    Dec 2008
    Location
    Japan
    Posts
    2,746
    Thanked: 1014
    Blog Entries
    2

    Default

    I would say they are equally important, with one condition: the stone must be fairly hard.

    Basically, and I might be opening a can of worms here, I think hardness of the stone is more important than "grit" when we're talking Japanese hones. I honestly believe that there's a real, measurable reason for this, namely: the "grit" in the Honkuchi naori Japanese hones is all pretty much the same, it just depends on how much is exposed, and at what speed, in the honing process. So hard hones = better control of exposure.

  5. The Following 2 Users Say Thank You to JimR For This Useful Post:

    Disburden (01-06-2011), Evritt (01-12-2011)

  6. #5
    Senior Member Traskrom's Avatar
    Join Date
    Apr 2009
    Location
    Moscow, Russia
    Posts
    590
    Thanked: 124

    Default

    Quote Originally Posted by JimR View Post
    I think hardness of the stone is more important than "grit" when we're talking Japanese hones.
    Exactly, your post of honing kamisori on one stone with different naguras make me think that different "grit" slurry is all you need for acheiving excellent result.

  7. #6
    Senior Member blabbermouth hi_bud_gl's Avatar
    Join Date
    Nov 2005
    Posts
    4,521
    Thanked: 1636

    Default

    this is a little tricky to answer. In reality you have to have finer stone then you can use different grit stones and get job done. But remember in last finishing stage you will end up using fine stones power not nagura. Lets say you have hardest stone chinese 12k and you can use different slurry get blade sharpened and in last finishing stage you can find fine nagura and use it. This will exactly what you are asking. In conclusion if your stone finer then nagura your idea wont work as you asked.if your nagura finer then stone itself it will work as you asked.gl

  8. The Following User Says Thank You to hi_bud_gl For This Useful Post:

    Traskrom (11-01-2010)

  9. #7
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4942
    Blog Entries
    2

    Default

    I have used the one stone method of honing with an Awase stone and an Asagi, Suita and Ohzuku. I have played around with a generic Japanese Woodworker nagura as well as using coticule and escher rubbing stones. On all I went from a thick slurry and then worked to dilute down to just water. You can hone a razor in fairly good shape using this method, but it can take a lot of time and experimentation. Worth the effort in my opinion from a learning perspective. On the few hundred razors I have honed using this method, only around 50 percent were good to go first time around.

    Have fun,

    Lynn

  10. The Following 4 Users Say Thank You to Lynn For This Useful Post:

    Disburden (11-01-2010), Evritt (01-12-2011), lz6 (11-13-2010), Traskrom (11-02-2010)

  11. #8
    Senior Member Nikolay's Avatar
    Join Date
    Nov 2010
    Posts
    105
    Thanked: 40

    Default

    Quote Originally Posted by JimR View Post
    I would say they are equally important, with one condition: the stone must be fairly hard.

    Basically, and I might be opening a can of worms here, I think hardness of the stone is more important than "grit" when we're talking Japanese hones.
    I have two hard jnats.

    One is Narutaki "Takachiho" and another is Uchigumori from Namikawa sword polishing kit.

    With good nagura stones (thanks to Tras Krom) even Uchigumori give very fine edge while it is looking as #6000 grit or under.

    Narutaki "Takachiho" is very hard and finer than Uchigumori
    but there are many defects (like dots and veinlets) on it's surface.
    Nevertheless it give the finest edge I have ever seen.

    While the other softer and definitely finer stones (Shoubu and one other from Dick Gmbh. with no name known) give no such a fine edge.

    Two another important things to achieve the finer edge
    in addition to hardness of stone and good nagura
    are the pressure applied while honing
    also amount of and consistency of slurry.

    I am going to continue my experiments
    so I want to know which stones could be used as alternative to nagura
    to achieve the finest slurry and thus to get the sharpest edge?

    Any idea?
    Last edited by Nikolay; 11-02-2010 at 03:55 PM.

  12. #9
    Senior Member Traskrom's Avatar
    Join Date
    Apr 2009
    Location
    Moscow, Russia
    Posts
    590
    Thanked: 124

    Default

    Nikolay

    Welcome to Straight Razor Place!

  13. #10
    Senior Member Nikolay's Avatar
    Join Date
    Nov 2010
    Posts
    105
    Thanked: 40

    Default

    Quote Originally Posted by JimR View Post
    I would say they are equally important, with one condition: the stone must be fairly hard.

    Basically, and I might be opening a can of worms here, I think hardness of the stone is more important than "grit" when we're talking Japanese hones. I honestly believe that there's a real, measurable reason for this, namely: the "grit" in the Honkuchi naori Japanese hones is all pretty much the same, it just depends on how much is exposed, and at what speed, in the honing process. So hard hones = better control of exposure.
    I have read the post once more and
    I almost accept that point
    but I don't like the word hardness.

    The hardness itself is not what we need.

    The subject is more complex, than just hardness of stone
    and include such characteristics as uniformity and density of particles (grains). The more uniform is grain in size and form
    the more dense is grain the better is stone for finishing honing.

    The second thing we need is the condition stone of working surface.
    It should be lapped very plain and very smooth.

    Good examples are arkansas and belgian yellow coticle.
    The size of their grain is bigger than grain of toishi, but their grain is well shaped and very uniform.

    IMHO translucent arkansas with surface lapped to mirror glace is the best stone ever for the final touch to the edge.

    BTW the japanese guys appraise such a translucent arkansas very high for it's hardness and uniformity

    I hope I will find soon and post here good SEM micrographs of toishi (like ones on toishi.jp site) and of arkansas to illustrate the idea of grain shape and uniformity.

  14. The Following User Says Thank You to Nikolay For This Useful Post:

    Evritt (01-01-2011)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •