Page 1 of 2 12 LastLast
Results 1 to 10 of 21
Like Tree4Likes

Thread: How I finish with (insert finisher here)

Hybrid View

  1. #1
    aka shooter74743 ScottGoodman's Avatar
    Join Date
    Sep 2009
    Location
    SE Oklahoma/NE Texas
    Posts
    7,285
    Thanked: 1936
    Blog Entries
    4

    Default How I finish with (insert finisher here)

    Before I start, please don't muddy the water if you have not honed over 50 razors on one particular finisher.

    We all know that a great shaving edge starts at the bevel setting, but the "magic" is in the finisher. I have been fortunate enough to obtain several finishers, but other than trial and error I have not found a thread to refer to.

    It sure would be nice to hear how a veteran on particular stone finishes their razors so that I or anyone else could use their method as a starting point.

    I'm talking about wiki stuff here...

    I will start:

    Charnley Forrest w/ oil
    Starting point: Progression of Shapton Glasstones 1,4,8,16K

    I start with adding three drops of Kroil evenly spaced on the stone. I started out using 3n1 oil and found it to be literally too thick. I then went to sewing machine oil that was thinner and it really works well. Kroil is even thinner and helps to speed up the finishing on a CF, which we all know is a slow finisher. The work is worth it though.

    I use slow, I repeat slow "X" strokes. Fast strokes on oil causes the blade to literally "hydroplane" on the stone and you will be getting nowhere fast. I start out with 10 strokes alternating sides each stroke. Wipe the blade, and repeat. I normally go about 50-60 strokes per blade depending on the blade hardness, wiping the blade at each 10. With TI's, I usually start at 75.

    If you are using sewing machine oil or other oil that is thicker than Kroil, expect to increase your passes 25-50%.

    Next blade, three drops of Kroil and repeat...
    Last edited by ScottGoodman; 03-12-2011 at 03:55 PM. Reason: clarification
    Frameback likes this.
    Southeastern Oklahoma/Northeastern Texas helper. Please don't hesitate to contact me.
    Thank you and God Bless, Scott

  2. The Following 3 Users Say Thank You to ScottGoodman For This Useful Post:

    MarkinLondon (03-12-2011), niftyshaving (03-19-2011), sharp (03-14-2011)

  3. #2
    Senior Member blabbermouth hi_bud_gl's Avatar
    Join Date
    Nov 2005
    Posts
    4,521
    Thanked: 1636

    Default

    Quote Originally Posted by shooter74743 View Post
    We all know that a great shaving edge starts at the bevel setting, but the "magic" is in the finisher.
    .
    This is soooooooooo True i wouldn't be more then happy to tell my finishers.

    Tried.
    C.f
    Escher.
    Coticule
    Japan(many of them)

    depends on the blade i will most likely will change the finisher
    SS blade most likely CF
    German made blade Escher
    Japanese could use for any razor except GErman made.

  4. The Following User Says Thank You to hi_bud_gl For This Useful Post:

    ScottGoodman (03-27-2011)

  5. #3
    aka shooter74743 ScottGoodman's Avatar
    Join Date
    Sep 2009
    Location
    SE Oklahoma/NE Texas
    Posts
    7,285
    Thanked: 1936
    Blog Entries
    4

    Default

    Thanks Sham, that's a start...now, how do you finish a blade on each of the stones?
    Southeastern Oklahoma/Northeastern Texas helper. Please don't hesitate to contact me.
    Thank you and God Bless, Scott

  6. #4
    Senior Member blabbermouth hi_bud_gl's Avatar
    Join Date
    Nov 2005
    Posts
    4,521
    Thanked: 1636

    Default

    Quote Originally Posted by shooter74743 View Post
    Thanks Sham, that's a start...now, how do you finish a blade on each of the stones?
    Cf i use only with oil.
    Escher only with slurry.
    Japanese only with slurry.
    Coticule doesn't make me happy. what i use with slurry without it or dilution
    Except Salm coticule.
    Very important use only weight of the blade.
    Slow strokes lets say stone is 7 inch long.
    1 stroke should last approximately 5 second.
    hope this helps.

  7. The Following 3 Users Say Thank You to hi_bud_gl For This Useful Post:

    CJBianco (05-26-2011), ScottGoodman (03-13-2011), sharp (03-14-2011)

  8. #5
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    I have tried
    coticule
    escher
    thuri
    Jnats many of them

    Coticule- I use it very very rarely
    I use the standard slurry dilution method and works fine

    Escher and Thury -I use them very very rarely
    Ialways use with slurry and dilute to finish on water.

    Jnats- I get top notch edges on anything with them.
    I have several with different hardness but all very fine to accommodate different steels.
    When I use naguras ot Jnat stone progression, I always use slurry diluted to water only to finish.
    If I use my synthetic progression I always finish on water only.

    I am waiting on a Frankonina to arrive and will give it a good work out to see how it is compared to the rest.
    Stefan

  9. The Following 2 Users Say Thank You to mainaman For This Useful Post:

    ScottGoodman (03-13-2011), sharp (03-14-2011)

  10. #6
    Ultimate Laid-Back Hero
    Join Date
    May 2010
    Location
    England
    Posts
    263
    Thanked: 67

    Default

    Don't want to muddy the waters, but thank you for the "slow" and the "three drops" advice. I've struggled with my CF, and will try these tips.

  11. #7
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    27,069
    Thanked: 13249
    Blog Entries
    1

    Cool Finishers

    Naniwa SS 12k - Finish with clear water using 3 heel forward x 3 "X" strokes very slow until the hone goes to just damp...

    Shapton GS 30k - Finish with clear water with a 3 forward, 2 spine leading, 1 forward

    Escher/Thuringen - About 20 pigtail passes with light slurry dilute to clear water with very slow X strokes and heel forward strokes

    Nakayama Midori (very hard) - 20 pigtail strokes with a light slurry until the slurry breaks down and feels like talc, then I slowly do heel forward and X strokes until dry..

    Select Grade Coticule - mostly on Sheffield Steel, 20 pigtails with light slurry and finish out to clear water

    PHIG - mostly on Swedes, 20 pigtails with light slurry and finish out slowly to clear water using at least 20 clear water feather light strokes at the end..

    CF - Still working on what I like best with this one... Right now I am playing with a water, slurry, and soap finish..

    Arkansas - about 80-100 feather light slow X strokes on Honing oil

    Long Swaty - About 15 lathered X strokes

    Norton 8k - Finish to clear water stop and rinse stone wipe of excess water and do feather light heel forward and X strokes very slow until damp...


    All my finishers are used only after the razor is already "Shaving Sharp", this is the most important part in my eyes, going to the Finish early I personally think is most people's problem...
    Last edited by gssixgun; 03-12-2011 at 07:34 PM.
    Str8Shooter likes this.

  12. The Following 13 Users Say Thank You to gssixgun For This Useful Post:

    alb1981 (08-16-2011), august11231 (03-14-2011), Bill S (03-20-2011), DerekC (06-25-2011), Disburden (03-13-2011), DMHarper (03-15-2011), JeffR (03-12-2011), Maxi (06-18-2011), MrMarx (09-12-2011), niftyshaving (03-19-2011), Sando (03-16-2011), ScottGoodman (03-13-2011), sharp (03-14-2011)

  13. #8
    Senior Member
    Join Date
    Jul 2008
    Location
    Houston, Tx
    Posts
    106
    Thanked: 81

    Default

    I just wanted to chime in a bit here. This thread has been one of the most helpful threads I have seen in quite a while. Thanks alot guys!

  14. #9
    Senior Member Kingfish's Avatar
    Join Date
    Dec 2008
    Location
    South Florida
    Posts
    1,057
    Thanked: 255

    Default

    Lately been a little lazy and busy, so after 8k Shapton , then a Japanese stone then 3-2-1 on the Shapton 30k and I am good to go.

  15. #10
    Special Agent Gibbs's Avatar
    Join Date
    Feb 2011
    Location
    Fennville, MI
    Posts
    628
    Thanked: 92

    Default

    I like the pigtail stroke by Liam Finnegan. Has anyone ever used a Coticule slurry stone on a C12K stone for the slurry? I have 2 of those slurry stones and wondered if anyone has done this? Great thread, and great video Glen!
    ~~ Vern ~~
    I was born with nothing and managed to keep most of it.
    Former Nebraskan. Go Big Red

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •