Page 1 of 2 12 LastLast
Results 1 to 10 of 14
Like Tree17Likes

Thread: I would like to apologize!!!

  1. #1
    Junior Member
    Join Date
    Nov 2013
    Posts
    22
    Thanked: 1

    Default I would like to apologize!!!

    I'm assuming there are shaving gods much like golfing gods, and after feeling like I had shot under par for my first shave with a straight yesterday I was put soundly in my place for the second shave!!! I would like to atone for my over confidence and pray for forgiveness and hope that tomorrow is a better day, lol


    There was blood and a lot of it I hope my penance is paid. I cut my cheek, bad angle with off hand and 3 weepers on the neck cleaned up with the de razor and while shaving my head cut a serious chunk out of it, which i have never done.


    Why? I am not sure, I changed soap from Proraso to a Sandalwood from Stirling which seems to be a slicker soap to me so I thought that would help but the razor was sticking and skipping from the start, muddled through the first pass wtg with it and regrouped, tried stropping again with a lighter touch and the second pass went better so I'm chalking this up to bad stropping technique. I'm going to endeavor to persevere, but today was rough.


    Any advice would be appreciated as I am definitely not the prodigy I thought I was.
    MickR, sharptonn and MattCB like this.

  2. #2
    Contains ingredients Tack's Avatar
    Join Date
    Sep 2012
    Location
    SE Texas
    Posts
    1,043
    Thanked: 237

    Default

    You are on the right track about stropping pressure. It seems to be human nature to feel that we should really bear down so it feels like the strop is "doing something" but the opposite is true. Stropping is not grinding but straightening, smoothing, burnishing the edge and no more pressure should be applied than is necessary to maintain even contact of the spine and edge. Improper stropping can dull a razor in a hurry, resulting in that pulling and skipping you reference. As you found, if it's not too bad you can bring it back with good technique. Strop the dickens out of that blade.

    I suspect that using too large a blade angle is responsible for most cuts since that almost forces us to apply more pressure. Again, "light is right". Of course, carelessness can bite even the most experienced shaver.

    Props for the Lone Watie reference too.. Chief Dan George was one of my favorite actors and that scene from Josey Wales was priceless. Keep at it but declare war on your whiskers, not your skin.



    rs,
    Tack
    ward1402, Geezer, BobH and 2 others like this.
    I have great faith in fools - self confidence my friends call it.

  3. #3
    ace
    ace is offline
    Senior Member blabbermouth ace's Avatar
    Join Date
    Dec 2010
    Location
    Virginia
    Posts
    3,362
    Thanked: 581

    Default

    Nobody is a prodigy at straight razor shaving. We all made mistakes, and still do. Learning from them is what made us better, then good, straight shavers.
    Geezer, Hirlau, BobH and 1 others like this.

  4. #4
    Junior Member
    Join Date
    Nov 2013
    Posts
    22
    Thanked: 1

    Default

    Josey Wales is one of my favorite movies of all time.
    ward1402 and Tack like this.

  5. #5
    A Fully-Fleshed Brethren Brenngun's Avatar
    Join Date
    May 2013
    Location
    Toronto, Canada
    Posts
    629
    Thanked: 130

    Default

    You're not unusual but I would recommend not changing a lot of things while you're still learning. Find what works and stick with the same prep & process until it becomes much easier. Then play with changes.
    Keep your concentration high and your angles low!

    Despite the high cost of living, it's still very popular.

  6. The Following User Says Thank You to Brenngun For This Useful Post:

    Hirlau (12-04-2013)

  7. #6
    Pasted Man Castel33's Avatar
    Join Date
    Jul 2010
    Posts
    1,283
    Thanked: 269

    Default

    Quote Originally Posted by Brenngun View Post
    You're not unusual but I would recommend not changing a lot of things while you're still learning. Find what works and stick with the same prep & process until it becomes much easier. Then play with changes.
    +1 to this. I always tell beginners pick one brush, one soap, one razor and one strop for the first couple months. It allows you to master that combination then you can sub things in one at a time.

    Also don't be overly confident about your lather. I see you use a de which probably means you have been making lather for a bit. However I have found that I can make a subpar lather a still get a decent comfortable shave from a de but not so with a straight.

  8. #7
    Senior Member
    Join Date
    Mar 2009
    Location
    Philadelphia
    Posts
    198
    Thanked: 34

    Default

    Agreed! overconfidence is asking for trouble with a straight, we all need to remember that a straight razor demands respect, attention, and that we remain humble, no matter how many shaves you have under your belt.

  9. #8
    Razor Vulture sharptonn's Avatar
    Join Date
    Oct 2010
    Location
    Lone Star State
    Posts
    26,103
    Thanked: 8612

    Default

    I might ask how you prep? Are you stropping properly? A big load of Proraso should be massaged into the whiskers with the brush. Try a very hot-wet towell on the face and over the lather for 1 minute, repeat.
    Now lather up and shave. It works for me. Skip the prep, pulling and bad shave. Every time!
    Last edited by sharptonn; 12-04-2013 at 03:20 AM.
    "Don't be stubborn. You are missing out."
    I rest my case.

  10. #9
    Junior Member
    Join Date
    Nov 2013
    Posts
    22
    Thanked: 1

    Default

    my prep is a hot shower, use conditioner on the beard let that sit for a couple of minutes rinse for a couple of minutes then get out and lather the face then I stropped the razor relathered and shaved

  11. #10
    Razor Vulture sharptonn's Avatar
    Join Date
    Oct 2010
    Location
    Lone Star State
    Posts
    26,103
    Thanked: 8612

    Default

    Quote Originally Posted by joed65 View Post
    my prep is a hot shower, use conditioner on the beard let that sit for a couple of minutes rinse for a couple of minutes then get out and lather the face then I stropped the razor relathered and shaved
    Sounds like you have good prep.
    What about razor/honing/stropping? Same razor? What? Perhaps some thinking about blade angle? Looks like you are on track to learn and share. I would say to always incorporate things which work. Go back to the Proraso and see? Any variable should be considered. Take them one at a time! JMO
    "Don't be stubborn. You are missing out."
    I rest my case.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •