Results 1 to 5 of 5
Thread: First razor specs. - HELP
-
02-23-2007, 04:15 AM #1
- Join Date
- Feb 2007
- Posts
- 20
Thanked: 0First razor specs. - HELP
Years ago I tried a cheap no-name disposable straight razor; I ended up in emerg.! I'm ready to try again. I've been researching so much that I'm now lost! What qualities or specs. should my first straight razor have? Money is an issue. Also what to look for in an entry level hone and strop (I realize that I need a shave ready razor but after a few uses, I'll be on my own)?
Thanks.
-
02-23-2007, 04:54 AM #2
What you're really looking for is a good Solingen or Sheffield steel piece. Other locations like Eskilstuna (Sweden), Spain, Italy and Japan (to name a few) have some good product as well. The easiest answer is just to wait for a member to advertise selling a shave-ready piece in your price range (they start at about $35 and go up depending on the condition and custom work). This is a gentlemanly place so you won't get screwed over.
-
02-23-2007, 05:31 AM #3
I don't know what your price range is, but you may consider this
http://shop.thewellshavedgentleman.c...2&categoryId=5
Tony Miller is the owner of that shop, and he is a well respected member here. That kit includes everything you will need to start shaving, including a shave ready razor. It should keep you in good shaving until you can find a hone. Most people seem to find that they can go a few months without honing their razors, though some guys don't go that long. You may end up dulling razor slightly on the strop, but if you take it slow you should be fine.
Matt
-
02-23-2007, 05:57 AM #4
Welcome, gzb10
You may want to consider a pasted paddle strop from Tony Miller if nothing else. It'll help you keep a pre honed razor shaving well for some time before you need to worry about taking it to a stone. The truth is, any decent piece of leather will work as a strop until you can afford the one you want. One thing to keep in mind is that you'll get what you pay for. As soon as you willing to put a little money into some decent gear, you'll have the equipment that will last at least a lifetime.
XLast edited by xman; 02-24-2007 at 03:29 AM.
-
02-23-2007, 08:48 AM #5
- Join Date
- May 2005
- Location
- Saint Paul, Minnesota, United States
- Posts
- 8,023
- Blog Entries
- 1
Thanked: 2209In addition to the above comments I would suggest looking for a razor of a size of 5/8 or 6/8. Make sure that it is honed and shave tested.
Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin