Page 1 of 2 12 LastLast
Results 1 to 10 of 16
Like Tree7Likes

Thread: Razor drag question

  1. #1
    Junior Member
    Join Date
    May 2014
    Location
    Oklahoma
    Posts
    4
    Thanked: 0

    Default Razor drag question

    Hey guys, I've been lurking for a while trying to learn from everyone's past experiences, but I finally decided to jump in and ask my question. I've recently got my first used straight and while I'm going slow doing just part of my shave for now, I really wonder if this razor is as sharp as it should be. I do all the usual face prep...hot water, hot towel, pre shave sometimes, have several soaps, glycerin and tallow based varieties, pay attention to proper angle, stretch my skin, and still my straight has noticeably more drag and sticks in my stubble much more than my Parker DE or Mach 3. Much more than a 24hr growth is pretty sketchy on the first pass. I'll also add that I have a baby face and a rather soft beard compaired to some men.

    I got the razor from a well known used razor source "shave ready", but I've of course been stropping it before each use about 40-50 strokes. Having never used a straight before I'm not sure if this is what it's supposed to feel like or not. I do have a balsa wood hone treated with .3 and .1 paste. One last thing that I've noticed is that my face/skin feels rough when I use the straight and it feels slick and smooth when I used my Mach 3 or Parker DE. Do you guys think my razor needs a better edge put on it?

    Thanks in advance for any help.

  2. #2
    Member OldSalt's Avatar
    Join Date
    Feb 2014
    Location
    Hamburg, Germany
    Posts
    95
    Thanked: 18

    Default

    Have you tried any of the usual tests like Hanging Hair Test or letting the blade pop your arm hairs without touching your skin? Of course the decisive thing is how it shaves, but the tests can give quite a hint. Does the blade grab when you lightly run your wet thumb along the edge. That test isn't really good for a shave ready though, because you can dull the edge.

    If nothing else helps, strop on the .1 paste for maybe 7 times and then leather strop it for maybe 50.

    Some say that a shave ready razor will leave your cheek smooth with one wtg pass. Mine don't but they do in three passes. Still, you can try that for a test too. Check your stropping technique. You can dull a razor doing it wrong.

    Good Luck,
    Old Salt
    Last edited by OldSalt; 05-09-2014 at 11:50 AM.

  3. #3
    Junior Member
    Join Date
    May 2014
    Location
    Oklahoma
    Posts
    4
    Thanked: 0

    Default

    Yes, I've tried the Hanging hair test and it seems to pass, but there are just so many variables involved with that test...the hair used, the speed at which you lower it on to the blade, how close you hold it to the blade, etc. I've also done the arm hair test letting the razor float through the hair. My arm hair is quite soft so it passes right through most of it without cutting, but does cut about 50% of my leg hairs. This reminds me of another potential issue with the razor that I forgot to ask about. Due to use and or repair the cutting edge is not flat. It's curved, a smiley if you will. With this shape when you strop the razor both ends don't really touch the strop so the sharpness along the edge must be rather inconsistent at best. I've considered getting a Parker shavette to see what it feels like on my face compared to this particular straight.

  4. #4
    Senior Member
    Join Date
    Dec 2013
    Posts
    114
    Thanked: 9

    Default

    Your lather can have an impact on how the razor glides. You might try a good quality cream as I found creams easier to lather and a bit more slippery than the soaps I have. Your blade angle can also be a factor. Try increasing/decreasing the angle to see if it makes any difference. It may be that your edge is sharp but not smooth. Micro chipping of the edge can produce the sticky feel you describe. I also have a shavette I used for comparison but keep in mind they do shave differently than a regular SR.

  5. #5
    Senior Member blabbermouth RezDog's Avatar
    Join Date
    Feb 2013
    Location
    Haida Gwaii, British Columbia, Canada
    Posts
    14,383
    Thanked: 4820

    Default

    I can't help but wonder, are you comparing how your skin feels after a single wtg pass to a single wtg pass. It could be that you whiskers are laying against your skin and are not being taken very short while doing a with the grain pass. Trying a small test of across the grain might prove or disprove that, also checking you double edge shave while shaving and observing how the different passes are working on your whiskers. All of our whisker growth patterns tend to be a little different so a refined technique will vary lot from shaver to shaver. Don't be afraid to try different things and I'm with John 3126 on the possibility that your lather may be too dry for a straight.
    john3126 and Walterbowens like this.
    It's not what you know, it's who you take fishing!

  6. #6
    Junior Member
    Join Date
    May 2014
    Location
    Oklahoma
    Posts
    4
    Thanked: 0

    Default

    Yes, I am indeed comparing apples to apples whether that be number of passes of direction of passes. Its not my whiskers that I'm saying is rough afterward. Its the surface of my skin that is abraded more with the straight than my other razors, regardless of direction or number of passes. This is why I'm wondering if the edge of my straight was prepared with something around only 6k and isn't as smooth as my DE or Mach3. It cuts, but isn't comfortable.

  7. #7
    Senior Member Siguy's Avatar
    Join Date
    Aug 2013
    Location
    Black Bear, NJ
    Posts
    1,672
    Thanked: 171

    Default

    Welcome to SRP Hambone13!

    I was initially asking myself the same question that Shaun brought up in comparing apples to apples. Moot, now you've answered that.

    I was in your boat as well. I bought a razor that wasn't ready to shave, though it had been said Shave Ready. I had some nasty shaves, but I fought through them. I broke down and sent it out to Lynn for a pro-hone. Something along the lines of "it must have been a real uncomfortable shaver" was said.

    I got that one back, muuuuuch sharper. But, I still had some uncomfortable results when done. Why? For me, it came down to lack of attention to the pressure.... But that was further down the road than you are ATM.

    You're heading in the right direction. I assure you that if you stick to it, you will be wondering how you ever put that M***3 to your face.

    Kind Regards,

  8. #8
    Junior Member
    Join Date
    May 2014
    Location
    Oklahoma
    Posts
    4
    Thanked: 0

    Default

    Assuming that the edge is sharp but not smooth, do you guys think the balsa wood hone with .3 and .1 paste is enough to polish it up, or would it require going back to an actual stone?

  9. #9
    Senior Member Siguy's Avatar
    Join Date
    Aug 2013
    Location
    Black Bear, NJ
    Posts
    1,672
    Thanked: 171

    Default

    Quote Originally Posted by Hambone13 View Post
    Assuming that the edge is sharp but not smooth, do you guys think the balsa wood hone with .3 and .1 paste is enough to polish it up, or would it require going back to an actual stone?
    That's kind of a tough one. The reason I say that is when I first started, I had only one razor. I had nothing to compare it too, so, essentially, I had no real idea whether it was shave ready or not.

    Maybe, posting a set of pics of the edge might help a bit. Also, have you done the pin test on the edge to make sure the edge hasn't rolled during stropping?

    The balso wood hone with paste. It all depends on at what state the edge is currently it. I'll explain it this way. Let's say I've honed up the 3K level. I then go to the paste. I'm not going to get a mirror shine. Why? The razor would have to go higher up the hone progression where the scratch patterns would get finer and finer until finally when one is finished honing, one could go to the pasted strop before leather stropping.

    So, albeit circuitously, it brings me back to questioning whether the razor is shave ready. If it were me, the nagging doubt alone was enough for me to break down and send it out. I went back to the M***3 for a few days. No big deal. I still got to practice stropping with a dull object, face prep and lathering in the meantime.

    One more thing: specify in your locale in what area in OK you are located. There are alot of mentors here and the likelihood is that there is someone close by.

  10. #10
    Senior Member
    Join Date
    Dec 2013
    Posts
    114
    Thanked: 9

    Default

    Quote Originally Posted by Hambone13 View Post
    Assuming that the edge is sharp but not smooth, do you guys think the balsa wood hone with .3 and .1 paste is enough to polish it up, or would it require going back to an actual stone?
    In my case I reset the bevel on a 1K then worked back up to the 12K. This razor did not like the Arkansas I used the first time around but took a beautiful edge on the synthetics.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •