Results 1 to 10 of 13
Thread: New guy, looking for help
-
09-18-2015, 03:46 PM #1
- Join Date
- Sep 2015
- Location
- Georgia
- Posts
- 10
Thanked: 0New guy, looking for help
I am fed up with safety razors and one of my coworkers suggested this site and a straight blade. I have practically no experience with shaving with a straight razor. I would some input on a good blade to start with and technique, I have watched a few YouTibe videos and they make sense but would like a little more information. One big concern is even with a safety razor, due to the size of my Adam's apple, I cannot get a close shave in the "pockets" that it creates with the rest of my neck. I am not overweight so, these areas are pretty prominent. Normally, I either leave a Brillo pad in these areas or end up having to shave 3 different ways and often times nick myself there. My concern with a straight blade is how to manage these areas without looking like I had a run in with a Guillotine.
Thanks,
Trajanus
-
09-18-2015, 04:00 PM #2
One of the first things you should do is go to the membership page, click on advanced search, put Georgia in the location slot. You will then see a list of all members that list Georgia as their location. You can also use your location + Georgia to find those closer to you. In any case, scroll down the list and look for those that have posted within the last 5 - 6 months. That shows there are current. Contacting one or more of them could get you a face to face session or two that will cut a few months off the learning curve. Or, on the main page, to the left, click on local help and scroll down to Georgia. There should be a listing of any members that are dedicated to helping the new shaver.
Other than that, read in the Library all you can and watch the videos associated with the library. Any video by Lynn or gssixgun will be authentic information.
Plus, asking on the forum directly will garner you a plethora or responses from interested members.
Good learning."The sharpening stones from time to time provide officers with gasoline."
-
-
09-18-2015, 04:14 PM #3
- Join Date
- Sep 2015
- Location
- Georgia
- Posts
- 10
Thanked: 0
-
09-18-2015, 06:01 PM #4
- Join Date
- Feb 2013
- Location
- Haida Gwaii, British Columbia, Canada
- Posts
- 14,436
Thanked: 4827I am not as angular as I once was. However the use of skin stretching is quite important both in terms of holding the skin taught so it does not move in front of the blade and for taking things around the corner, so to speak. It will also flatten hollows somewhat and make for a closer more comfortable shave.
It's not what you know, it's who you take fishing!
-
The Following User Says Thank You to RezDog For This Useful Post:
Trajanus (09-18-2015)
-
09-18-2015, 07:06 PM #5
Skin stretching, a smiling blade, some practice and some perseverance.
Welcome, btw.
-
The Following User Says Thank You to jfk742 For This Useful Post:
Trajanus (09-18-2015)
-
09-18-2015, 07:14 PM #6
Skin stretching, practice and learning the grain patterns in those hard to get areas. It probably took me five months of practice and trial and error at different methods before I could really get a super smooth finish on my neck when checked from all directions. I'm rather thin and getting old so hollows with some sagging skin added to the mix, don't get old and you'll be fine.
-
The Following User Says Thank You to apipeguy For This Useful Post:
Trajanus (09-18-2015)
-
09-18-2015, 10:40 PM #7
- Join Date
- Sep 2015
- Location
- Georgia
- Posts
- 10
Thanked: 0Thanks to you all. I will look for some videos about stretching to get that area lined up. Also, I am looking at which razor to get. Debating between a Dovo "best-quality" 5/8 and a Thiers-Issard 5/8" Spartacus. Any thoughts?
-
09-18-2015, 10:44 PM #8
- Join Date
- Feb 2013
- Location
- Haida Gwaii, British Columbia, Canada
- Posts
- 14,436
Thanked: 4827If you are looking at new razors there are far more that do not hand hone than do. Make sure your razor is hand honed and stropped, truly shave ready. Other than that make sure it is not a large nor a small blade. 5/8 or 6/8 are fine. The other thing is to make sure you think it is the coolest of them all. It will help you through tough spots in the learning curve, if you find any. Some people have just picked it up and gone with it. No hiccups or difficultly. Not me, bit there are those people out there.
It's not what you know, it's who you take fishing!
-
The Following User Says Thank You to RezDog For This Useful Post:
Trajanus (09-18-2015)
-
09-19-2015, 12:05 AM #9
Ok, I'm going to try to explain how I shave my adam's apple area. It's not easy to explain, so bear with me...
I shave my neck down to the apple, then sort of 'half swallow' so my adam's apple moves up to where I've shaved. I then sort of 'hold' the swallow and shave the area left unshaved. It may take some practice to get right, but it works for me. YMMV! Lots of skin stretching too.
Does any of that make sense?
-
The Following User Says Thank You to wayne394 For This Useful Post:
Trajanus (09-19-2015)
-
09-19-2015, 12:39 AM #10
- Join Date
- Jul 2015
- Location
- Helmetta, NJ
- Posts
- 439
Thanked: 56Something to also keep in mind, unless people are constantly touching your neck, the appearance of a smooth shave is all you need.
Initially, a straight razor seems like a gigantic blade. However, most of the time, you are shaving with a small part of the blade except on very flat areas. Also, the rounded heel of the blade can fit nicely into hollows, unlike a perfectly squared off safety razor.
But as said before, stretching the skin one way, then the other, into more shaveable areas of your face will help tremendously.
I'd also check out Ralph Aust blades, you can get one in combo with a strop from Straight Razor Designs, and the strop is deeply discounted. Get a 3" strop to lessen the stropping learning curve.
-
The Following User Says Thank You to Moonshae For This Useful Post:
Trajanus (09-19-2015)