Page 1 of 3 123 LastLast
Results 1 to 10 of 21
Like Tree2Likes

Thread: Go straight razor route or shavette?

  1. #1
    Junior Member
    Join Date
    Nov 2015
    Location
    Canada
    Posts
    5
    Thanked: 0

    Default Go straight razor route or shavette?

    Hello all,

    I'm a newbie to the forum and looking to change things up from DE shaving. I was wondering what your thoughts are on going the Feather AC SS route or go straight to straight razor? I'm leaning towards SR and was looking at this razor, and if it's a good quality beginner razor I might go that route.

    Thanks

    Wapienica SFK (5/8") - Straight Razor Place Classifieds

  2. #2
    Senior Member blabbermouth eddy79's Avatar
    Join Date
    Feb 2013
    Location
    Gosnells Perth Western Australia
    Posts
    7,193
    Thanked: 656

    Default

    If it's in the classifieds its probably a good razor. Know wapis have been spoken of alot so a search would get info. From a de you only have to learn the razor use and stopping. A shavette is essentially using a de blade so I wouldn't see the point in using the same blade just a different way. JMOI
    My wife calls me......... Can you just use Ed

  3. The Following User Says Thank You to eddy79 For This Useful Post:

    Reefer23 (11-18-2015)

  4. #3
    Junior Member
    Join Date
    Nov 2015
    Location
    Canada
    Posts
    5
    Thanked: 0

    Default

    That's what I was thinking as well and why I'm leaning toward the SR.

    I also didn't want to spend too much for my first straight hence the classifieds .

  5. #4
    Senior Member Ernie1980's Avatar
    Join Date
    Dec 2013
    Location
    Texas
    Posts
    1,568
    Thanked: 269

    Default

    The classified section is a great place to start, it's where I got my first straight. I would for sure go that route over a shavette, as mentioned above it a step away (and above) from disposable blades. You need to look into a strop also to keep that razor shave ready c

  6. The Following User Says Thank You to Ernie1980 For This Useful Post:

    Reefer23 (11-19-2015)

  7. #5
    Senior Member blabbermouth RezDog's Avatar
    Join Date
    Feb 2013
    Location
    Haida Gwaii, British Columbia, Canada
    Posts
    14,432
    Thanked: 4826

    Default

    I have both straights and a Weck sextoblade. I often use the Weck for trips, because it is less stuff to take. Otherwise I stick with the straight. With a straight you also need a strop, so if money is tight it could be a factor. Another plus in the shavette is that you don't need to have them honed or buy hones or learn to strop. But they are not the same. I enjoy stropping and different strops. I love all of my straights and hones and honing. For me it is the process and not just the shave. It is a beautiful thing to take and old straight razor and fix it up and hone it and then shave with a 100 to 200 year old straight razor. So it kind of depends where you are as to which way to go.
    It's not what you know, it's who you take fishing!

  8. The Following User Says Thank You to RezDog For This Useful Post:

    Reefer23 (11-19-2015)

  9. #6
    Senior Member
    Join Date
    Oct 2015
    Location
    Pittsburgh, PA
    Posts
    212
    Thanked: 21

    Default

    Hello Reefer,

    I'm a newbie too. I spent so much time researching, contemplating etc. on shavette vs. straight razor. I searched eBay, the classifieds, antique shops and craigslist, as well as the classifieds for a straight razor. If you do decide to get a straight, just wait until the right deal comes along here on the classifieds. You'll find a good deal on a razor that has likely been honed by someone who has experience in straight razors.

    That said, I decided to purchase a Feather SS fixed handle. For me, the thought of a traditional straight razor was cool, nostalgic, etc. But the investment needed, and time required to learn to strop, hone etc became too much for a busy professional with two young kids. Plus when I travel, I can just take my feather with a fresh razor and soap/bursh, and not worry about a strop, or damaging my blade during transport. Some day, I may change my mind an get a straight razor anyway.

    I don't regret my decision to purchase a feather one bit. I got mine on amazon, and purchased the professional blades. Lucky for me, I only purchased one package of 20 blades, but was shipped 9 packages of 20 blades...enough to get me through 5 plus years of shaving! The feather professional blades are crazy sharp. My first shave with 3 passes took over 25 minutes. I made sure to take my time. The second shave took about 20 minutes. My third shave took less than 15. With each shave not only did I gain confidence, but I noticed the blade was much more forgiving. I'm not sure why, but others have said the same thing.

    Others will tell you to get a traditional straight razor...that's fine. For me, I purchased the feather, and I have no regrets. I would highly recommend it.

  10. The Following User Says Thank You to relli1130 For This Useful Post:

    Reefer23 (11-19-2015)

  11. #7
    Senior Member DeObfuscate's Avatar
    Join Date
    Nov 2015
    Location
    SouthWest Louisiana
    Posts
    105
    Thanked: 12

    Default

    I went shavette, before straight. And just recently picked up D.E. If shavettes taught me anything, it was taking my time. Seriously exposed half of a D.E. blade deserves respect. The weight and handeling are not the same as a straight, or a DE for that matter. As stated above, some folks prefer shavettes. Doesn't really matter if you end up trying everything, anyway?
    To deobfuscate is to convert something that is difficult to un͝d̡͝e҉͞r̴͝st̨̕a͘͢n̢̛d̕̕ ̧͝
    into one that is simple, understandable and straightforward.

  12. The Following User Says Thank You to DeObfuscate For This Useful Post:

    Reefer23 (11-19-2015)

  13. #8
    Junior Member
    Join Date
    Nov 2015
    Location
    Canada
    Posts
    5
    Thanked: 0

    Default

    Thanks for all the info! The honing aspect is one part that worries me a little about the straight. From what I read online, as long as I strop it properly I should only have to hone it once a year? Does the quality of the strop affect the time between honing the razor?

  14. #9
    Senior Member blabbermouth RezDog's Avatar
    Join Date
    Feb 2013
    Location
    Haida Gwaii, British Columbia, Canada
    Posts
    14,432
    Thanked: 4826

    Default

    It is true that you may get some very long stretches between honings with the use of a pasted strop and a regular strop. Once you get a genuine strop it is really more about the hand than the strop. At the price that guys hone for these days, it is not a major expense. At twice a year it is likely the same cost as blades, but I'm guessing there. It is not that hard, you just need to pay attention.
    It's not what you know, it's who you take fishing!

  15. The Following User Says Thank You to RezDog For This Useful Post:

    Reefer23 (11-19-2015)

  16. #10
    Senior Member blabbermouth eddy79's Avatar
    Join Date
    Feb 2013
    Location
    Gosnells Perth Western Australia
    Posts
    7,193
    Thanked: 656

    Default

    There is honing and maintenance. A barbers hone or finishing stone would last forever and unless you damaged the edge you should be good for a long time. The trick is a little regularly. Touch up with a couple passes as soon as the edge starts lagging. You don't need to bevel set thats already done you are just straightening and refining the edge again andvit only takes a little.
    MJC likes this.
    My wife calls me......... Can you just use Ed

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •