Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Senior Member Creel's Avatar
    Join Date
    Apr 2007
    Location
    Ottawa Ontario
    Posts
    202
    Thanked: 4

    Default Post shave routine for care and storage of the straight razor

    Ok lads; care to share your post shave routines for care and storage of your straight razors?

    I take care to clean all the water off the blade and handle, with particular care to the part of the handle that houses the stem it gets little air circulation when the razor is closed.

    I then wage the concept of post stropping vs. letting the edge reset and almost always go the strop route.

    I use the linen and leather strop and I think it probably does a grand job of friction drying and keeping the moisture at bay.

    I use a qew tip to drizzle some drugstore mineral oil onto the blade, tang, rivets and all indents in the letter stamps.

    Then I wage the hazards vs air circulation debate and stash the closed razor in a dedicated section of my sock drawer.

    What say you?
    Last edited by Creel; 05-26-2007 at 07:09 PM.

  2. #2
    Pogonotomy rules majurey's Avatar
    Join Date
    Jan 2007
    Location
    Norf Lahndon, innit?
    Posts
    1,622
    Thanked: 170

    Default

    Toilet paper to dry blade and in between scales. Then 20 passes on linen and leather each. Then pop it into the lockable metal cashbox (I have inquisitive young children!) which has a few of those silica packets inside to absorb moisture. Take cashbox out of bathroom and into bedroom.

    Seems to do the trick!

  3. #3
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    Cotton ball with a bit of alcohol for the first wipe, a dry kleenex for the second and that should do it.

  4. #4
    There is no charge for Awesomeness Jimbo's Avatar
    Join Date
    Aug 2006
    Location
    Maleny, Australia
    Posts
    7,977
    Thanked: 1587
    Blog Entries
    3

    Default

    I wipe the blade and scales with my bath towel. Then I blow between the scales. Then I hold the razor in the open (shave) position with a good grip and wave it vigourously through the air. Then I lay it open on top of my (dry) shaving mug for a half day or so. Then it gets put back in its box and stored in the top drawer of my vanity unit.

    James.
    <This signature intentionally left blank>

  5. #5
    Senior Member
    Join Date
    Sep 2006
    Posts
    1,180
    Thanked: 1

    Default

    I wipe my blade and scales down with a dry towel (careful not to press against the edge) and close it. Then it goes back into the medicine cabinet until called for the next day.

  6. #6
    Senior Member Creel's Avatar
    Join Date
    Apr 2007
    Location
    Ottawa Ontario
    Posts
    202
    Thanked: 4

    Default

    This thread is coming along nicely.

    majurey: Nice trick with the lock box and silica pouches. Where did you score the pouches or did you just stockpile them?

    I’ve heard chalk is also a good moisture absorber so I chuck some dollar store sidewalk chalk in my toolkits.

    Jimbo: Are you doing fight katas while your waving your razor through the air? You’re one scary dude!

  7. #7
    Lover of the Boar Big_E's Avatar
    Join Date
    Feb 2007
    Location
    Dallas,TX
    Posts
    316
    Thanked: 10

    Default

    I wipe the lather off on a towel as I shave. When I finish, I use tissue paper to dry the blade and put it away as I go to work. Later in the day when I return home, I strop 60 times on each side and give the blade an alcohol wash and tissue paper dry. I always rotate and use a new razor every week, switching out on Sunday evenings.
    Ernest

  8. #8
    Don
    Don is offline
     
    Join Date
    Mar 2007
    Location
    Ohio
    Posts
    2,410
    Thanked: 213

    Default

    Wipe it down let it air dry apply a thin coat of Kurobara Camellia Oil

  9. #9
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    I heard bentonite clay absorbs moisture as well. I'd direct you to my dad, but since he's living in Europe and doesn't speak English, I'd suggest talking to Colleen. She should know where to get it here in the Americas.

  10. #10
    Carbon-steel-aholic DwarvenChef's Avatar
    Join Date
    Mar 2007
    Location
    Santa Barbara, CA
    Posts
    2,814
    Thanked: 823

    Default

    I use a dry hand towel to dry it off on and than place it in a ceramic vase on the counter. I'm lucky enough to get my own bathroom (at the moment, kitty litter room) so I don't have to worry about others messing with them.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •