Results 1 to 10 of 12
-
08-10-2008, 11:52 PM #1
- Join Date
- Aug 2008
- Posts
- 5
Thanked: 0Whiskers give the razor a hard time
I just shaved my second time. I let my beard grow over the weekend and just shaved it. I strop around 30 times.. basically until it feels like its a suction.. then i did the same thing for the cotton. I made sure I lathered enough on my face, until i couldn't see my beard any more basically.. well.. i started shaving.. going down my face seemed ok..(still had some long hairs going down) but when i went against the grain it felt like the hair was giving my razor a hard time :-\ It did this the first time i shaved too.. And I have to go over the spot over and over like its not cutting it.(not all the time) Is it not sharp enough? Am I not strop it enough or wrong? (away from the blade, i've seen the youtube videos) The razor will cut my hair that I put on it to see if its sharp. It also hurts when i shave like i'm getting a TOO close of a shave. I see blood but no cuts.. well not all the time and only does it on my neck mainly, and no razor burn. I relathered myself when it gets dry.. The tricky spots seem to be my neck and the curves :-\.
I was told my razor was honed. I bought it from classicshaving.com I asked for the honing service but got a call from them saying it was prehoned by them and got a refund. I'm probably doing something wrong.
Anyone have an idea.. I'm going to shave next weekend(when I can grow the hair a little).
-
08-11-2008, 12:53 AM #2
I am kind of having the same problem with mine, 2 shaves and the razor just doesn't seem sharp enough to me, but I am a newbie so I don't know how it "should" feel. My cartridge razor feels ALOT sharper and more comfortable than my straight.
Good luck,
Photoguy67
-
08-11-2008, 01:55 AM #3
If shaving skills are not at fault... and that's a big if seeing it's your second time, that razor may need some attention.
A well honed razor should cut smoothly & effortlessly
A pass in the HHT means nothing if the shave is uncomfortable.
One important thing tho, you should strop on the linen side first , not last. Is that what you did ?
Someone close by should be able to sort it out for you.Last edited by onimaru55; 08-11-2008 at 02:07 AM.
The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.
-
08-11-2008, 02:25 AM #4
Seems like your razor is not sharp enough. Why do you strop on the leather first and then on the cotton? Usually it id done the other way round.
Presuming your razor was prehoned it should be sharp enough. If you strop you have to keep the strop taut all the time, apply little pressure and keep the spine on the leather all the time. I usually do 40 laps on the linen and 60 on the leather. IIRC thebigspendur has in his experiemnts found out that stropping more has no added value.Plus ça change, plus c'est la même chose. Jean-Baptiste Alphonse Karr.
-
08-11-2008, 02:52 AM #5
-
08-11-2008, 03:57 AM #6
- Join Date
- May 2005
- Location
- Virginia
- Posts
- 852
Thanked: 79Agree with the others. Leather then linen is a bad idea unless you are using certain of the Illinois strops, which oddly seem to work better that way. Also straight from the hone I find linen is not necessary at all; only after a few days of shaving, then it gives a "boost" before hitting the leather.
Keep at it, you're on the right path.
John P.
-
08-11-2008, 10:43 AM #7
- Join Date
- Aug 2005
- Posts
- 26
Thanked: 1Hi Tortri,
Did you prepare your beard well? I ask because you did not mention that little detail. The best shave is obtained after a nice warm shower when your hairs are very soft.
Alternatively, try hot towel but shower is a lot better in my opinion.
Preparation is absolutely critical for classic wet shaving with straight razor.
I hope this helps.
mudo_koshaka
-
08-11-2008, 04:29 PM #8
That's not normal. I'd watch your blade angle and pressure as you might be shaving at too steap of an angle and cutting into too much of the top skin layer. Also don't use too much pressure to "force" the razor through the hair. Let it do it's job with you only guiding it a little.
-
08-11-2008, 06:23 PM #9
more advice
Make sure you dry your razor thoroughly after shaving and either oil it or strop it before putting it away.
If you shave with a razor and then dry it and leave it in the head, it will corrode on the edge. It will lose some of it's glide, and if it is bad enough, it won't come back without a honing.
Going against the grain on the neck is tricky. I use a low angle and a serious of short strokes with very light pressure. Lead with the toe if you can, it reduces pull.
By the way, I have used a linen or cotton strop only 2 or 3 times the entire time I have been shaving. I don't bother with them. I only use leather and get great edges.
Not to say they don't have a use, but they just aren't very important, you don't need to use them.
Toolarts
-
08-11-2008, 10:29 PM #10
- Join Date
- Aug 2008
- Posts
- 5
Thanked: 0Thanks for your help guys. I'll give it a try this weekend. I'll only strop with the leather and make sure i strop after i'm finished with it.