Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Steel crazy after all these years RayG's Avatar
    Join Date
    Jan 2008
    Location
    CT
    Posts
    1,410
    Thanked: 937

    Default Starting Off From Scratch Dirt Cheap

    A lot of this information can be found in our excellent wiki, as well as in several old threads in bits and pieces, but I thought I'd put this together for folks wanting to start out from scratch on a budget.

    I have been through a lot of soaps, creams, aftershave etc in over 20 years of wetshaving, and this is what I (insert disclaimer here) think is the absolute cheapest way to start, without sacrificing quality. I am sure there are other options out there, but this is what I'd recommend to someone who'd ask me for advice:

    SOAP: Looking at the ration of price to quality, I'd say Ogallala. Even at double the price of $4.50/puck, it lathers with the best, is slick, cushioning and protective. Easy to lather. If you are new to wetshaving though, you probably would want to try shaving cream first, since it is easier to use for beginners.

    CREAM: A huge tub of JM Frasier cream - excellent slick lather, and very cheap, especially if you are in Canada. Kiss My Face's pump dispenser is also cheap and good, but I think a notch below.

    AFTERSHAVE LOTION: I have used a lot, but find nothing as healing and hydrating as mixing my own. Here is what I do (with stuff from Walmart): 2 parts Corn Husker lotion + 1 part Aloe Vera gel (in the aisle with sunscreen usually) + 1 part Thayer's witch hazel (make sure it is Thayer's, the other stuff smells bad). I would adjust the amount of witch hazel to the viscosity you prefer (so add it incrementally as the last element). You'll end up with very good stuff with no scent. I personally add 10-20 drops (according to your preference) of eucalyptus oil from the pharmacy section. I have also tried adding different EDT samples, usually given free by upmarket perfumeries like Floris (email them for free samples). You can also get small vials of essential oils, but those are expensive. Some folks like adding a few drops of glycerin (from the pharmacy) but I have not felt a need to do so.

    AFTERSHAVE SPLASH: I like alcohol based splashes. Since I am adding a lotion after the splash, I really don't care about whether it has anything else good for my skin. I'd start with cheap drugstore stuff. Choice is up to you - Aqua Velva, Old Spice, Pinaud... it's all good.

    BRUSH: If you want badger, I'd opt for the Semogue 730 Silvertip from Portugal, from either Leon at Vintage Scent or Rasage Poulin. The only reason to upgrade later on is because you want to. This would be a fine one and only brush for both soap and cream.

    My only experience with boar is Omega Professional. Very good, about $14 or less. Check out the barber supply stores like Appleton for the best prices.

    LATHERING MUG/BOWL: Old mug or cereal bowl. Be creative.

    STROP: Tony Miller's starter strop. It is made of the same latigo as his top of the line 2 and 1/2 inch latigo, but without the bells and whistles. I started out with this at a little over $20 (now a little more but with some improvements) and to date is still my go to strop, and my only latigo. Never needed another.

    Whether you need linen/cotton is the subject of debate in many threads. But the thing is, you will more quickly ruin your edge with poor technique on linen or cotton so think about getting that AFTER your stropping technique is sound. Stropping on only leather is just fine.

    Kenrup's Fillie strop has had good reviews, and it is only $19 shipped from Ken, but I have no personal experience with it. I do have with Ken, and he is a great guy.

    HONES: Don't need them yet. Get a CrO baggie from ChrisL, and that is more than enough. You can get a larger supply from a number of vendors, but that is more stuff than you will need. Make your own pasted strop - see the wiki for details. Heck you can even just take the glass off a 5 x 7 picture frame, smear CrO on half (lengthwise) and use that.

    RAZOR: Used to be "get a wapi" but they are now scarce. Double Arrows are cheap but extremely good shavers when properly honed. I got an early one on ebay and the blade has no defect (the scales are trash and needs replacing), but many now complain of QA problems with uneven grinds etc. If you go this route, be sure to get your wapi or DA shave ready from a reputable reseller (a few members here offer them).

    A vintage razor from the SRP classifieds is still a good, fun way to start. Many guys will also give you lots of advice with the razor you buy. Lots of good razors at $50 or less. Be sure to get them from a reputable seller and that it is shaveready. If you want to be absolutely sure, get a good razor and send it to one of our honemeisters.

    As with all vintage razors, make sure the blade is straight with an even blade width (unless it was designed otherwise), with even honewear, and with little honewear. A lot of times, what sellers call "a nice smile" is just a lot of honewear at the toe. There have also been some razors popping up with picnic table sized honewear recently so, sadly, you need to be more vigilant. If you have any doubt, check and see if someone familiar is online and ask them for their opinion before you click the "buy it now button."

    Another good option is to send a pm asking if someone has a starter razor he'd be willing to sell. I would say that most if not all of the members here would go out of their way to help you out. If not with a razor, then with lots of advice. You'd be surprised. Good way to get to know folks too.

    There you go. This is how I'd start from scratch for way less than $100. Have fun!
    Last edited by RayG; 05-12-2009 at 03:28 AM.

  2. The Following 14 Users Say Thank You to RayG For This Useful Post:

    freebird (08-16-2009), joker75 (05-13-2009), Leighton (05-13-2009), McWolf1969 (05-13-2009), netlevi (05-21-2009), Oglethorpe (05-13-2009), paco (05-14-2009), pjrage (05-13-2009), rcardon (08-06-2009), smokelaw1 (05-13-2009), syslight (05-13-2009), Tam905 (05-13-2009), The0ctopus (05-13-2009), Tonsor (05-12-2009)

  3. #2
    Senior Member sbrouwers's Avatar
    Join Date
    Jan 2009
    Location
    Woodward, OK
    Posts
    875
    Thanked: 348

    Default

    Nicely done Ray very well put!! Thanks

  4. The Following User Says Thank You to sbrouwers For This Useful Post:

    RayG (05-12-2009)

  5. #3
    Member MNRazor's Avatar
    Join Date
    May 2009
    Location
    Minnesota
    Posts
    52
    Thanked: 7

    Default

    Awesome thread. Thanks for looking out for us newbies out there.

  6. The Following User Says Thank You to MNRazor For This Useful Post:

    RayG (05-12-2009)

  7. #4
    I shave with a spoon on a stick. Slartibartfast's Avatar
    Join Date
    Jan 2009
    Location
    Stay away stalker!
    Posts
    4,578
    Thanked: 1262
    Blog Entries
    1

    Default

    Sticky and Wiki article this

  8. The Following User Says Thank You to Slartibartfast For This Useful Post:

    RayG (05-12-2009)

  9. #5
    Senior Member blabbermouth ChrisL's Avatar
    Join Date
    Oct 2007
    Posts
    4,445
    Thanked: 834

    Default

    Thanks for the mention about the chrome ox, Ray. That aside, thanks for this thread. I wish I would have seen such a thread when I started. Having HAD has been fun and all, but starting as inexpensively as possible is a great idea. It keeps the learning progression where it should be: prep, stropping and shaving first with honing, resto, etc second.

    Thanks Ray.

    Chris L
    "Blues fallin' down like hail." Robert Johnson
    "Aw, Pretty Boy, can't you show me nuthin but surrender?" Patti Smith

  10. The Following User Says Thank You to ChrisL For This Useful Post:

    RayG (05-12-2009)

  11. #6
    Junior Member
    Join Date
    Mar 2009
    Posts
    2
    Thanked: 1

    Default

    excellent info as always, Ray.. thanks for helping me (and others) to get started the right way!

  12. The Following User Says Thank You to JoeFriday For This Useful Post:

    RayG (05-14-2009)

  13. #7
    Vitandi syslight's Avatar
    Join Date
    Jan 2007
    Location
    Scharie County, NY USA
    Posts
    2,761
    Thanked: 224

    Default

    Good thread Ray...

    so ummmm.... Ray... do you have a starter razor









    Be just and fear not.

  14. The Following User Says Thank You to syslight For This Useful Post:

    RayG (05-14-2009)

  15. #8
    The original Skolor and Gentileman. gugi's Avatar
    Join Date
    Aug 2007
    Posts
    17,410
    Thanked: 3906
    Blog Entries
    1

    Default

    indeed, i was almost tempted to start again from scratch myself!

    actually i did buy a cheap razor off the classifieds recently, now i've got to send it to a honemeister.
    and then i'll use these inexpensive badger and boar brushes i have...

    i think we should have a cheapo week in SOTD!

    nice post ray.
    Last edited by gugi; 05-13-2009 at 03:51 AM.

  16. The Following User Says Thank You to gugi For This Useful Post:

    RayG (05-14-2009)

  17. #9
    membres supérieurs cessnabird's Avatar
    Join Date
    Jan 2009
    Location
    Austin, TX
    Posts
    417
    Thanked: 67

    Default

    Great thread to sum it all up for people just starting out!

  18. The Following User Says Thank You to cessnabird For This Useful Post:

    RayG (05-14-2009)

  19. #10
    Member Tam905's Avatar
    Join Date
    Jan 2009
    Location
    Ottawa or Toronto Canada
    Posts
    82
    Thanked: 16

    Default

    Great article. It really puts everything in one nice place for people just starting out.

    Cheers,

    - Andrew -

  20. The Following User Says Thank You to Tam905 For This Useful Post:

    RayG (05-14-2009)

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •