Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Senior Member
    Join Date
    Apr 2009
    Location
    manchester, tn
    Posts
    938
    Thanked: 259

    Default QUESTIONS ABOUT NORTON 4000/8000

    just opened my norton 4000/8000 i purchased from vintagebladesllc and i was surprised to find the stone feels more coarse than i thought. i have a woodstock/steelex 1000/6000 waterstone i got off amazon and the 1000 side feels less coarse that either side of the norton. does the norton "slick" up with use?. this is my first experience with waterstones and need help as i do not want to ruin any of my SR blades.thanks again for all the help from everyone on here

  2. #2
    Now if I could just find a midget.. Joeman's Avatar
    Join Date
    Jan 2009
    Location
    Raleigh, NC
    Posts
    356
    Thanked: 66

    Default

    You will need to "lap" it. I had the same problem when I first got mine. If you check in the wiki and search you will find much info on lapping the hone, including the grid process along with best practices on how to do it. I myself use 220 grit Norton sandpaper wet/dry and then progress to 1000 Norton wet/dry on a piece of tile I have in the house. There is also information as far as smoothing out the edges to prevent damage to your blades.

    Enjoy

    Joe

  3. The Following User Says Thank You to Joeman For This Useful Post:

    59caddy (06-11-2009)

  4. #3
    I shave with a spoon on a stick. Slartibartfast's Avatar
    Join Date
    Jan 2009
    Location
    Stay away stalker!
    Posts
    4,578
    Thanked: 1262
    Blog Entries
    1

    Default

    You may want to invest in some type of lapping stone. the nortons need lapped pretty often.

    I've been thinking about getting rid of my norton lapping stone and picking up a dmt now that i have some naniwas also.......

  5. The Following User Says Thank You to Slartibartfast For This Useful Post:

    59caddy (06-11-2009)

  6. #4
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4942
    Blog Entries
    2

    Default

    The 4K side of the Norton is pretty grainy at first. Lap about 1/8 inch off it until it feels pretty smooth and you're there.

    Lynn

  7. The Following 3 Users Say Thank You to Lynn For This Useful Post:

    59caddy (06-11-2009), EucrisBoy (12-18-2011), warpigs421 (06-11-2009)

  8. #5
    Junior Member
    Join Date
    Mar 2009
    Location
    Quebec, Canada
    Posts
    23
    Thanked: 4

    Default

    I have also purchased a Norton combination stone kit (220/1k + 4k/8k + lapping stone)
    As Lynn said in the previous post, I had to lapped them about 1/8 inch in order to get them very smooth and flat.
    I'm not an expert yet in honing but I got pretty good result off of the 8k + 100 strops.
    Pat.

  9. The Following User Says Thank You to pdube1 For This Useful Post:

    59caddy (06-11-2009)

  10. #6
    Senior Member
    Join Date
    Apr 2009
    Location
    manchester, tn
    Posts
    938
    Thanked: 259

    Default

    just wanted to thank everyone. i lapped the stone with norton 660 wet sandpaper and it turned out fine. it is great to know everybody here is so willing to help with any problem. hopefully someday i will be able to also help others as i have been helped here. THANKS AGAIN!

  11. #7
    They call me nick... warpigs421's Avatar
    Join Date
    May 2009
    Location
    Schaumburg IL
    Posts
    54
    Thanked: 4

    Default

    Quote Originally Posted by Lynn View Post
    The 4K side of the Norton is pretty grainy at first. Lap about 1/8 inch off it until it feels pretty smooth and you're there.

    Lynn
    I didn't lap my 4000/8000 before first use. Maybe that why my edge was kind of itty-shay after all was said and done.

    It actually does cut hair though (and that was after I did a thumbnail test AFTER the 8K run), it's just not a joy to shave with. I'll be lapping more firecely than Jeff Gordon this weekend, and making another go of it!

    Thanks.

  12. #8
    Member AFDavis11's Avatar
    Join Date
    May 2005
    Location
    Virginia
    Posts
    5,726
    Thanked: 1486

    Default

    Quote Originally Posted by 59caddy View Post
    hopefully someday i will be able to also help others as i have been helped here. THANKS AGAIN!
    You certainly will . . . and the circle will be complete!

  13. The Following User Says Thank You to AFDavis11 For This Useful Post:

    59caddy (06-11-2009)

  14. #9
    Member Cutthroat_trout's Avatar
    Join Date
    Apr 2008
    Location
    Charlotte, NC
    Posts
    89
    Thanked: 16

    Default

    Where does one find a lapping stone ?

  15. #10
    < Banned User > John Crowley's Avatar
    Join Date
    Apr 2006
    Location
    Ft. Worth, TX
    Posts
    611
    Thanked: 169

    Default

    Quote Originally Posted by 59caddy View Post
    just opened my norton 4000/8000 i purchased from vintagebladesllc and i was surprised to find the stone feels more coarse than i thought. i have a woodstock/steelex 1000/6000 waterstone i got off amazon and the 1000 side feels less coarse that either side of the norton. does the norton "slick" up with use?. this is my first experience with waterstones and need help as i do not want to ruin any of my SR blades.thanks again for all the help from everyone on here
    Nortons are not suitable for honing until you lap them - just get some 600 grit sandpaper and do it under running water.

  16. The Following User Says Thank You to John Crowley For This Useful Post:

    EucrisBoy (12-18-2011)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •