Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Member manonengine's Avatar
    Join Date
    Jul 2009
    Location
    Deep South
    Posts
    35
    Thanked: 1

    Default Expensive vs Reasonable

    Hello All. I would like to purchase a second razor eventually and I have been looking at several razors. I already have a Dovo Best Quality 6/8 Carbon Steel, got it for around a hundred bucks. Of course the higher end razors like Mastro Livi's is out of the question for my budget. I've noticed that Dovo razors go from around $300.00 to just under $100.00. I've noticed that the difference seems to be in the Gold etching or in higher quality scales. My question is, is there any difference in the quality of the steel between the higher priced and lower priced razors. Also they offer a carbon blade in High Carbon Swedish Steel that is reasonable, is there some difference there? Thanks for all of the good advice that is available here.

    Manonengine, man is hot right now down here.

  2. #2
    Woo hoo! StraightRazorDave's Avatar
    Join Date
    Sep 2008
    Location
    Toronto, ON
    Posts
    1,257
    Thanked: 309

    Default

    While I cannot vouch for the type of steel in the different models of Dovo razors, my advice is to buy a second hand razor. You can pick up a really nice razor from respectable members in the classifieds here. It will cost you a lot less than buying a brand new razor and will give you the same quality shave. Except my first razor (which I no longer have) all my razors are all vintage ones and am very pleased with them.

  3. The Following User Says Thank You to StraightRazorDave For This Useful Post:

    manonengine (08-11-2009)

  4. #3
    Member Angeleyes's Avatar
    Join Date
    Jan 2009
    Posts
    88
    Thanked: 10

    Default

    I love both of the Dovo razors I own--one is SS and the other is Swedish carbon steel. Both of mine are higher end because of factors like you mentioned such as scale material, gold wash, etc. I do know Dovo uses different steels on a few of their razors. For example, the Bergischer Lowe is the only one where they use Swedish carbon steel, I believe. I would assume however that most of their other carbon steel razors (or SS razors for that matter) use the same quality or type of steel.

    As far as buying a second razor, it's definitely a solid idea. To have at least two in your rotation is a very good thing, especially when you have to send one off to be re-honed.

    I have four razors out of my collection that I use regularly in my rotation--everything from a $200 Dovo to an $1100 Joe Chandler Damascus with mammoth ivory scales. Both have distinctly different feels, but both ultimately provide really great shaves--as do all of my razors. My newest addition is a Filarmonica Doble Temple 13 which I got through the classifieds here, and it was a great price for a simply amazing razor. Not too many frills, just an all around great shaver. So check the classifieds regularly and you should find something perfect to add to your collection. Have a great week!

  5. The Following User Says Thank You to Angeleyes For This Useful Post:

    manonengine (08-11-2009)

  6. #4
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    33,009
    Thanked: 5019
    Blog Entries
    4

    Default

    I suspect Dovo uses the same steel for all their carbo steels and the same with the stainless models but that's just a guess. I have a few of them and they are all great shavers. Just because they don't advertise the type of steel doesn't mean its different. I know the mammouth scaled LE was also advertised as Swedish Steel.

    Its true the best value lies with a vintage blade but at the same there is just something about getting a brand spanking new razor.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  7. The Following 2 Users Say Thank You to thebigspendur For This Useful Post:

    BeBerlin (08-10-2009), manonengine (08-11-2009)

  8. #5
    . Bill S's Avatar
    Join Date
    Sep 2006
    Location
    Richfield, Ohio
    Posts
    2,521
    Thanked: 597

    Default

    If you can go $300 have you considered a Livi new-grind? Great razor and not too much over $300.

  9. The Following User Says Thank You to Bill S For This Useful Post:

    manonengine (08-11-2009)

  10. #6
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    I like Dovo but for variety you might take a look at Thiers Issard. I like them a lot too. The newer ones have a new steel that they are using and are very good. The old ones were advertised as 'Silver Steel' whatever that means and were good too. They are in the same price range as the Dovos when you get into the higher priced models.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  11. The Following User Says Thank You to JimmyHAD For This Useful Post:

    manonengine (08-11-2009)

  12. #7
    Senior Member Croaker's Avatar
    Join Date
    Feb 2008
    Location
    Arizona
    Posts
    1,360
    Thanked: 376

    Default

    +1 on a Thiers-Issard. My wife bought me the older Sheffield Silver Steel model with blonde horn scales, and it is one of my best looking razors. Shaves well too!

  13. The Following User Says Thank You to Croaker For This Useful Post:

    manonengine (08-11-2009)

  14. #8
    Senior Member blabbermouth hi_bud_gl's Avatar
    Join Date
    Nov 2005
    Posts
    4,521
    Thanked: 1636

    Default

    After hunting for best razor for a long time i ended up shaving only 2 razors/
    1 Puma Gold seal
    2 TI - very heavy razor old one Never seen second similar razor .
    They are the best .( this doesn't mean there is no better one there is but i haven't tried it yet)
    at The moment i am testing TI to see how long i can shave without touching any hones ,pastes. only strop and shave.
    So far results excellent. 7 shaves and blade seems like is getting sharper by using it.

  15. The Following User Says Thank You to hi_bud_gl For This Useful Post:

    manonengine (08-11-2009)

  16. #9
    Senior Member
    Join Date
    Jan 2008
    Location
    Northern California
    Posts
    1,301
    Thanked: 267

    Default

    Check out Martins' wares here.
    RasurPur Online Shop - The finest tools for a perfect shave

    These razors are well within your price range.
    1/4 Grind Le Grelots are awesome shavers and I have two that I use almost 90% of the time. They just match my beard heaviness and the quality of the steel is very high. I am not a associated with these guys. Have a look at their site.

    Go to the home page and check it out.


    Take Care,
    Richard

  17. The Following User Says Thank You to riooso For This Useful Post:

    manonengine (08-11-2009)

  18. #10
    Junior Member
    Join Date
    Jun 2009
    Location
    Northern CA
    Posts
    12
    Thanked: 2

    Default go vintage

    i feel like you could get a great razor for alot less from a antique store or something and bring it back to life or employ the help of one of the restorers/honemiesters on this forum. +1 on the classifieds here too.

  19. The Following User Says Thank You to bkvisler For This Useful Post:

    manonengine (08-11-2009)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •