Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Junior Member
    Join Date
    Feb 2010
    Posts
    3
    Thanked: 0

    Default Am I doing this correctly?

    First off, hello to everyone. I have many questions. I have ordered the DVD and am waiting for it to arrive. In the meantime, I'll let you know my tools.

    Dovo All Steel Stainless 5/8 from Amazon
    Badger Brush
    Proraso Shaving Cream
    Leather Strop from Heirloom Razor Strop Co

    I'm not sure if I need to hone it because when I use it after I strop about 25 times against the cloth, then 25 against the leather, I still hear a scrapping sound. Also, as soon as the proraso shaving cream is off my face, it's hard to pass over that area again.

    I don't know if my razor is shave ready. Like someone else said here, I don't know what a good shave is suppose to feel like. I'm just doing WTG and it's not a pleasant experience at all. I do look like a have a decent shave but it burns after the aftershave.

    If I do need to hone, what should I get?

    FYI: I got started with straight razors with "The Art of Manliness Guide" and got all my supplies from the guide - The Ultimate Straight Razor Shaving Guide | The Art of Manliness

  2. #2
    Member AFDavis11's Avatar
    Join Date
    May 2005
    Location
    Virginia
    Posts
    5,726
    Thanked: 1486

    Default

    Welcome! You probably need to send your razor out to be honed. It cannot simply be honed by an inexperienced person.

  3. #3
    Super Shaver xman's Avatar
    Join Date
    May 2005
    Location
    Lotus Land, eh
    Posts
    8,194
    Thanked: 622

    Smile Welcome, freshforce

    Unless you paid for the razor to be hand honed, it almost certainly is NOT shave ready. You'll need to get that done. There are plenty of gents here who can provide the service.

    Assuming good beard prep, the blade should cut like a hot knife through butter. DON'T EVER FORCE A STRAIGHT RAZOR THROUGH YOUR BEARD! Unless you want to be called Scarface.

    The hollow ground razor will always sound as it pops the hairs of your beard.

    X

  4. #4
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Welcome to SRP. Take a gander at the beginner's guide here in the SRP Wiki for some good info. You can find someone to hone your razor here in 'member services' in the classifieds.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  5. #5
    Senior Member dward's Avatar
    Join Date
    Aug 2008
    Location
    Germantown, MD
    Posts
    1,686
    Thanked: 245

    Default

    Welcome aboard!! You have already been advised to send your razor out for honing. Ensure that it is someone who knows how to hone a straight razor (check the classifieds under member services). Don't give it to your buddy who knows how to sharpen knives. Your face will teach you a painful lesson...

  6. #6
    Junior Member
    Join Date
    Feb 2010
    Posts
    3
    Thanked: 0

    Default

    Thanks for the greetings and tips. I called some local barbers around MA and none hone razors. Would it be ok to buy a waterstone and just hone myself?

  7. #7
    Senior Member blabbermouth jnich67's Avatar
    Join Date
    Jun 2006
    Location
    Westchester NY
    Posts
    2,485
    Thanked: 184

    Default

    It takes some time and practice to learn how to hone a razor and since you don't know what a keen edge feels like, you'd be better off sending it out to a pro. Then you'll know what to shoot for when you do start learning to hone. This will lead to less frustration.

    Jordan

  8. #8
    Senior Member
    Join Date
    Feb 2007
    Location
    Chicagoland
    Posts
    844
    Thanked: 155

    Default

    You can either hone it yourself or send it to someone to hone for you; which is best, only you can decide. Some guidlines, however.

    Do you have any experience with sharpening edged tools. This can be knives, woodworking tools, axes, what ever. If you do, then you should be able to pick up razor honing quickly. The principles are the same.

    If not, then you should probably consider sending the razor out for its first honing, but start researching how to hone.

  9. #9
    Rookie
    Join Date
    Nov 2009
    Location
    Delta, Utah
    Posts
    372
    Thanked: 96

    Default

    If you want to be able to learn to str8 shave in the least amount of time possible, and the most comfortable route, get your razor honed by any of the fine honemeisters in the SRP classifieds. If you like a really tough challenge and like to be uncomfortable, then get a hone and figure it out yourself. There are many variables needed to conquer in order to get a close comfortable shave, a shave ready razor being the most important. If you are constantly wondering if it is your razor you will have a hard time narrowing down which variable are giving you troubles. Getting a proper shave ready razor allows you to forget about the razor and concentrate on the other variables such as your stropping, prep, pressure, angle, mapping and stretching. Get it honed by an experienced razor honemeister then have fun learning how to use it, imo.

  10. #10
    Blood & MWF soap make great lather JeffE's Avatar
    Join Date
    Oct 2009
    Posts
    558
    Thanked: 97

    Default

    Some here will give you a different view, but if you are interested in the unvarnished opinion of a relative newcomer to this field -- SEND YOUR RAZOR OUT TO BE HONED BY A PRO. Don't do it yourself, and don't give it to someone who doesn't already hone hundreds of these razors a month.

    The simple reason is this. It is difficult enough to learn straight razor shaving, and so while you are trying to master this skill, starting off with a FRESH, SHAVE READY blade is one huge way to simplify the task. You see, there are some things that you should be able to accomplish with practice so long as your blade is in sharp, shave-ready condition. So when you are having difficulty with these tasks AND you were the one who sharpened the blade, there is no way of knowing whether you are shaving incorrectly or your razor is honed in correctly. If you have your razor honed by an expert, on the other hand, then you can diagnose your problems that much quicker, because you will have eliminated the question of honing from the number of variables that you have to work with.

    It's kind of like saying that you want to learn how to play electric guitar AND you want to make the guitar that you're going to be playing out of a nice piece of ash that you own. Well, that's great, and there's no doubt that learning both skills will give you more insight into being a better player. But while you're working on learning to play the guitar, stick with one that you know is already capable of making excellent music and any shortcomings, if there are any, are from the playing technique and not other factors.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •