Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Razor budgeting

  1. #1
    Junior Member
    Join Date
    Feb 2010
    Posts
    4
    Thanked: 0

    Default Razor budgeting

    After reading the forum here I came to the conclusion that a disposable is not an option for a beginner who is looking into straight edge shaving for waste reduction and financial responsibility. So I'm curious how would you/did you budget first getting into this habit? Did you/would you buy a complete set right from the start or would you poke around and buy as you go, or would you take the chance and buy an old razor, strop, and ect?

  2. #2
    Senior Member hornm's Avatar
    Join Date
    Jul 2009
    Location
    Portland, Oregon, United States
    Posts
    518
    Thanked: 125

    Default

    As I've stated before in other posts/threads I just kind of jumped right into it without any real knowledge. Went the shavette route off Amazon/Classic and then bought a strop, etc, etc. All in all the best idea is to go through either the classifiedes or check out what deals vendors like RupRazor or SRD have. That way you get everything you need lumped together (money saver) and you'll know that the products you are receiving are a durable quality. I'm sure others will have other options but right off the top of my head that's my best suggestion.

    Good Luck,
    Michael

  3. #3
    Junior Member
    Join Date
    Feb 2010
    Posts
    4
    Thanked: 0

    Default

    good you have used a disposable maybe you can tell me if a disposable is a better shave then these "normal" throw-aways?

  4. #4
    Well Shaved Gentleman... jhenry's Avatar
    Join Date
    Dec 2009
    Location
    Indianapolis, IN
    Posts
    3,860
    Thanked: 3760

    Default

    Quote Originally Posted by Oddity View Post
    After reading the forum here I came to the conclusion that a disposable is not an option for a beginner who is looking into straight edge shaving for waste reduction and financial responsibility. So I'm curious how would you/did you budget first getting into this habit? Did you/would you buy a complete set right from the start or would you poke around and buy as you go, or would you take the chance and buy an old razor, strop, and ect?
    Oddity,

    I agree with hornm. Getting a reasonably priced str8 razor shave set of at least a razor and a strop saves you money in the long run. A set like that can be purchased through one of the vendors who advertise here at SRP, such as Straight razor Designs or in the "Classifieds."

    In fact, I think an SRP member is selling a starter set in the "Classifieds" right now. It not only includes a razor and strop, but a shave brush too.
    "Age is an issue of mind over matter. If you don't mind, it doesn't matter." Mark Twain

  5. #5
    Junior Member
    Join Date
    Feb 2010
    Posts
    4
    Thanked: 0

    Default

    Sadly I missed out on that deal thats why I am here posting this now!

  6. #6
    The Assyrian Obie's Avatar
    Join Date
    Mar 2009
    Location
    Milwaukee, WI
    Posts
    11,145
    Thanked: 2755

    Default Razor Budgeting

    Hello, Oddity:

    To start off in the world of straight razor shaving you need four essentials: a good but relatively inexpensive razor, same for a strop, a boar brush and a puck of soap.

    Place a high ceiling of, say, $150 on your starter kit and then begin chipping away at the cost until you've reached a manageable price tag for yourself.

    If you can manage $150, you'll come away with a nice set up. Many vendors offer starter kits for a reasonable price. Or you can buy your razor from the SRP classified for a reasonable price, to begin with, and shop around for a modest strop. A good boar brush goes for around $20, give or take, and soap shouldn't cost that much.

    Regards,

    Obie

  7. #7
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Welcome to SRP. I can't add much to the above other than check out the SRP Wiki beginner's guide here if you haven't already done so.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  8. #8
    Rookie
    Join Date
    Nov 2009
    Location
    Delta, Utah
    Posts
    372
    Thanked: 96

    Default

    The only advice I have to add is that it would be a good idea to get everthing at one spot or you will probably be sitting around for a week or so waiting for everything to arrive. Having a shave ready razor in hand and waiting for a stop to arrive is one of the longest weeks I have ever experienced.

  9. #9
    Senior Member hornm's Avatar
    Join Date
    Jul 2009
    Location
    Portland, Oregon, United States
    Posts
    518
    Thanked: 125

    Default

    Quote Originally Posted by Oddity View Post
    good you have used a disposable maybe you can tell me if a disposable is a better shave then these "normal" throw-aways?
    If your talking about items like the schick octro and others. Yes....with a catch. Even in the holder the blades are thin and relatively flimsy. They can give a great shave but they don't have as "smooth" an edge as a true str8. Becuase your using 1/2 a double-edge blade you end up with a spike point on both the heel & toe ends of the razor so it's pretty easy to nick or full out gouge yourself. Even with the fine edge a true str8 has it has a bit of rigidity to it keeping the blade edge straight basically wherever you're at. The shavette blade with it's "flexability" will bow here and there and while your learning your angles can have a tendency to reach out and bite you. Also with a true str8 you can pretty confidently (with respect) go over areas that have minor blemishes and the like with out generally causing too much damage whereas the Shavette....your gonna bleed. I'm not trying to say that they are a bad thing but after you learn to use a shavette and move up to the real deal you have to re-learn some of what you thought you knew. The angles between the shavette and tru-str8 are different. Because of the way the handles are made you can only get down to a certain angle leaving more room to get bit. A tru-str8 can pretty much lay flat on your face which can be more usefull in some hard to reach spots during shaving.
    If you want to try one no-one is stopping you but i have to agree with most others here that it would be in your better interest to get one of the "begginers" sets from a reputable vendor or classified listing.

    Good luck

  10. #10
    Wander Woman MistressNomad's Avatar
    Join Date
    Dec 2009
    Location
    Minneapolis, at the moment.
    Posts
    367
    Thanked: 160

    Default

    You only need four things.

    1. Shave ready razor
    2. Strop
    3. Shaving soap/cream
    4 Brush

    And two of those are negociable. You *could* use foam-in-a-can, but it's not as good, and won't give you as nice as a shave. Still, it's an option, if you must.

    A RupRazor Filly will run you 20 bucks. You can also find cheap, serviceable strops in the Classifields.

    You can buy a decent shave-ready vintage razor for 30 bucks in the Classifields. Maybe even a hair less.

    You can get a cheap brush from Walgreens that'll do the job for $5-$10.

    You can get good quality soap for $5-$10.

    So, if you're frugal and careful, you could get a decent starter set-up for under 70 bucks.

    Obviously you could spend hundreds on an elaborate set-up, but it's not necessary, and there's no reason you can't get quite a good shave from a set-up of under $100.

    Look around trusted sources and compare prices. Read the Wiki so you know what "great deals" to avoid (poor quality razors, bad strops, etc).

    Maybe you'll find a starter kit that offers the best value, maybe individual pieces. It's really up to you and your budget.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •