Results 1 to 10 of 65

Thread: HELP!!!!!!!!!

Hybrid View

  1. #1
    Str8 & Loving It BladeRunner001's Avatar
    Join Date
    Apr 2010
    Location
    Twilight Zone
    Posts
    3,740
    Thanked: 3180

    Arrow Angle & pressure

    Hello WineGuyD

    Welcome to SRP.

    If Lynn sharpened the str8, you can bet your mortgage that it's sharp .

    In my "limited" experience, it's ALL about:

    1. Angle, Angle, Angle and
    2. Pressure, Pressure, pressure

    Plain and simple

    If it's any consolation, I had the same problems...If you get those things wrong, especially the angle, your blade will skip and hop. You may think you have the angle/pressure right, but chances are that you probably don't and you will have to give it some time for these ingredients to "kick in" together, synchronously. You will know when they do

    That, my friend, comes in time...not a long time, but time nonetheless. be patient and hang in there. Allow yourself to develop muscle memory. Your brain has to also adjust to a new method. Once that gets there, the angle and pressure fall into place. BUT, you do HAVE to make a conscious decision and watch these things as you shave.

    They will become second nature to you (and your hands).

    Don't worry about the irritated skin in the beginning. While you are learning a new technique, your skin has to learn to adjust to this technique too...it's a whole new ball game with a whole new set of tools. Give it time. A wise member on SRP (aka John Crowley) once told me: "your skin will toughen up". And toughen up, it did. Give it a few weeks.

    Keep at it...make sure that:

    1. Concentrate on your pre- and post-shave preps. i.e., take your time to soften the beard by building a thick lather, work it into the beard for some time, etc...

    2. Use natural products (cremes, soaps, A/S)

    3. AVOID alcohol products at ALL cost...while alcohol soothes and cools the skin, it will lead to inflammation and on an already irritated skin, this spells disaster


    Hope this helps,

  2. The Following User Says Thank You to BladeRunner001 For This Useful Post:

    WineGuyD (06-20-2010)

  3. #2
    Wine Evangelist WineGuyD's Avatar
    Join Date
    May 2010
    Location
    North NJ
    Posts
    98
    Thanked: 11

    Default More Progress this morning

    Ok, after the slight progress the other day achieved by vigorously stropping the razors, I figured a little "extreme" stopping would be even better so i parked myself at the dining table last night and laid my strop on the table, to guarantee it was flat with no cupping, and proceeded to strop both razors for about half an hour each or about 500 strops each.
    The result was a modest but noticeable improvement in the shave, less pulling and less noisy. I still don't get a stubble free result from one pass so I decided to borrow my barbers technique of doing short repeated strokes over the same area which eventually left a stubble free area.
    I also realized the shave soap was drying out if It took more than a minute to get to that spot so I started to lather zone by zone instead and reapplied a hot towel before each new lather. Bottom line is I managed to complete a full face shave, WTG only, in a little under 10 minutes with out a nick and no razor burn which was plaguing me on all the previous shaves especially just to the side of my chin.
    So in summery, the razors needed aggressive proper stropping, i needed to shave in sections and regularly reapply shave soap and hot towel.

    Does anyone have any comments on the shave soap? I'm using Institute Karite and I'm creating a thin but dense lather on my face, not the whipped cream look(I can't seem to get that), maybe another brand would be better suited for me?

  4. #3
    Junior Member Wickedblade's Avatar
    Join Date
    May 2010
    Location
    Kentucky
    Posts
    19
    Thanked: 3

    Default

    Mitchells Wool Fat....really helps me in the learning curve....lots of cushion and lasts longer on the face.

  5. The Following User Says Thank You to Wickedblade For This Useful Post:

    WineGuyD (06-21-2010)

  6. #4
    Senior Member Dllandry's Avatar
    Join Date
    Dec 2009
    Location
    Toronto On M1N 3G1
    Posts
    672
    Thanked: 233

    Default

    Where can one purchase some of this wonderful Mitchells Wool Fat soap?

  7. #5
    Junior Member Wickedblade's Avatar
    Join Date
    May 2010
    Location
    Kentucky
    Posts
    19
    Thanked: 3

    Default

    I ordered mine from SRD but you can also get it from Amazon and probably Classic Shaving. Kinda pricey but worth it.

  8. #6
    Wine Evangelist WineGuyD's Avatar
    Join Date
    May 2010
    Location
    North NJ
    Posts
    98
    Thanked: 11

    Default Progress report

    Alright, my 9th shave this morning and although it went ok, I did feel a little more pulling and resistance despite stropping the night before. I ordered the Wool Fat shave soap but until it arrives I'm locked into the Institute Karite.
    I was watching several Youtube videos on shaving technique this afternoon and can't get away from the fact that every guy demonstrating a shave technique was getting a stubble free result from each downward stroke of the razor while I see lots of random hairs remaining in the wake of a stroke. Can anyone tell me definitively whether a stroke of a straight razor should leave as clean a trail as a Mach 3? Shouldn't the razor either cleanly cut all the hairs or none at all?

  9. #7
    Str8 & Loving It BladeRunner001's Avatar
    Join Date
    Apr 2010
    Location
    Twilight Zone
    Posts
    3,740
    Thanked: 3180

    Default

    Hi WineGuyD
    Remember, the objective is for "hair reduction" with each pass...not a straight swooping action that obliterates all hairs.

    One step at a time..

    The only thing, IMHO, that cartridge shaving and str8 shaving have in common is the word "shaving" ...What they do and accomplish are vastly different. Come to think of it, cartridge shaving should be changed to cartridge torture or irritation .



    Quote Originally Posted by WineGuyD View Post
    Alright, my 9th shave this morning and although it went ok, I did feel a little more pulling and resistance despite stropping the night before. I ordered the Wool Fat shave soap but until it arrives I'm locked into the Institute Karite.
    I was watching several Youtube videos on shaving technique this afternoon and can't get away from the fact that every guy demonstrating a shave technique was getting a stubble free result from each downward stroke of the razor while I see lots of random hairs remaining in the wake of a stroke. Can anyone tell me definitively whether a stroke of a straight razor should leave as clean a trail as a Mach 3? Shouldn't the razor either cleanly cut all the hairs or none at all?

  10. The Following User Says Thank You to BladeRunner001 For This Useful Post:

    WineGuyD (06-22-2010)

  11. #8
    -- There is no try, only do. Morty's Avatar
    Join Date
    Feb 2010
    Location
    SE PA
    Posts
    501
    Thanked: 167

    Default

    Quote Originally Posted by WineGuyD View Post
    I was watching several Youtube videos on shaving technique this afternoon and can't get away from the fact that every guy demonstrating a shave technique was getting a stubble free result from each downward stroke of the razor
    WineGuyD,
    As Robert mentions, we're talking "hair reduction." That's removing "some" of our beard with each pass we make.

    I've been at this since February and I'm just now attaining a DFS. No idea when I will finally achieve a BBS shave. When I do, it will be in "my" time, not someone else's time frame.

    Watch the videos for inspiration but don't look to them for indication of how you "should" be doing.

    I'm committed to taking as long as it takes to learning how to shave MY face with my straight razor.

    Will you join me in that commitment?
    Namaste,
    Morty -_-

  12. The Following 3 Users Say Thank You to Morty For This Useful Post:

    BladeRunner001 (06-23-2010), Englishgent (07-10-2010), WineGuyD (06-23-2010)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •