Results 1 to 10 of 16
Thread: functional shaving
-
01-12-2011, 09:28 AM #1
functional shaving
I want some opinions concerning what equipment to get, I understand that most of the members here collect razors and are always looking for the perfect shave. However, my point of departure is slightly different although I do have a soft spot for a beautiful blade I am very much an outdoor person and will spend many a shave in the bush or in the mountains.
So what I need is a setup that is functional rather than pretty, easy to hone easy to strop and for as little as possible. I can collect pretty things later on.
Any suggestions.
-
01-12-2011, 09:36 AM #2
"Cheap Tools Is Misplaced Economy. Always buy the best and highest grade of razors, hones and strops. Then you are prepared to do the best work."
- Napoleon LeBlanc, 1895
-
01-12-2011, 09:46 AM #3
I dare say I have perused the wiki a few times, and the beginners shopping list surely offers items for beginners... however, the info there does not seem to answer my query. But I take it your opinion is that the items listed there and the guides, as the best for traveling, expense, and longevity.
-
01-12-2011, 02:36 PM #4
- Join Date
- Jun 2009
- Location
- Boston, MA
- Posts
- 311
Thanked: 67What's 'best' will vary from person to person.
If you want a 'concrete answer', here you go:
Razor: Genco or Torrey 5/8" - 6/8" round point. These are good, inexpensive razors that could last you a lifetime. You're probably going to initially need two razors, as it's likely that you'll dull your first razor.
Strop: Ambrose or Ruprazor strop. Get one with the linen/canvas component. Again, not flashy, but very serviceable.
Don't mess with honing, when you start out.
EDIT: I noticed that you're going to be outdoors a lot. You may want to have a stainless razor. I'd suggest a Friodur, but they're not super-cheap.
-
01-12-2011, 03:00 PM #5
conflicting priorities
The weather resistance and low cost are the nut to crack.
for compactness and weather resistance, I'd probably consider a DE for backpacking. To get a stainless str8 that's cheap probably means damaged and somewhat restored - broken blade that was shortened. I wouldn't want to make a stop compact enough for backpacking.
As alternative, perhaps a high carbon cheapo that's coated in automotive paste wax on all surfaces except honing/stropping surface of the spine and the edge. That approach would give you access to the cheaper blades. You'd have to coat edge and spine in wax or oil when not in use, or maybe store in a silicon treated sleeve, such as those make to store firearms.
-
01-12-2011, 03:11 PM #6
- Join Date
- Sep 2010
- Location
- Kalgoorlie, Western Australia
- Posts
- 168
Thanked: 40I'd follow the wiki, it's designed to supply the user (beginner or otherwise) with a full kit of functional but not neccicarily uh, flowery product.
my opinion,
Razor- Something stainless, the edge should last longer maybe a dovo
Soap- for 'out in the rough' something with lanolin or glycerin based
Strop- any quality reasonable priced strop. member MickR makes a Kangaroo hide strop which is top quality and well priced. this is my daily strop so I can attest to its function (thanks again mick ^_^)
Brush- maybe a boar bristle would suffice, they work well and can be picked up cheap.
as for pre and post shave, I usually use warm water to prep and a splash of cold to finish.
Just my thoughts
ps, just read the wiki beginners shopping list.
this really does spell out what you are looking for, a functional not fancy shave.
-
The Following User Says Thank You to KalgoorlieBoi For This Useful Post:
nicolaasdekker (01-12-2011)
-
01-12-2011, 04:26 PM #7
On Strops:
I can get hold of leather but is it worth making your own? It will certainly be the cheapest option for me. Or are there variables I am not taking account of?
strip of leather with a hole punched in each end and a string... walk into shop buy right size leather ask them to make two holes walk out with strop...?
-
01-12-2011, 04:33 PM #8
On Brushes,
Wiki says get badger, some suggest boar, I will get good quality second hand rather that low quality new. Is brush quality really that important?
-
01-12-2011, 04:39 PM #9
I have heard Frank's brushes are decent and inexpensive.
-
01-12-2011, 04:40 PM #10
- Join Date
- Aug 2010
- Posts
- 242
Thanked: 45