Page 1 of 2 12 LastLast
Results 1 to 10 of 14
Like Tree2Likes

Thread: What should I do with new razor from ebay?

  1. #1
    RazorBase DB application developer
    Join Date
    Jan 2012
    Location
    West Midlands, UK
    Posts
    299
    Thanked: 67

    Default What should I do with new razor from ebay?

    Hi everyone,

    I've just started using a straight - 4 shaves so far - with a very cheap razor and strop set from amazon. Although I didn't have anything to compare it with, this blade was not as sharp as I expected (trying the HHT it cut in and then cut along the hair, not cutting it clean through.) Also the blade is very wide - 8/8 - and hard to use in the moustache area.

    So I got an ERN Ator from ebay, which has just arrived. The seller described it as 'not shave ready, but can be made so by honing', but it is already sharper than the cheapo razor I started with - trying an HHT it catches for a moment and then cuts clean through, and it outperforms the cheapo at taking off arm hair.

    The equipment available to me is a strop, which I've used a bit, and a Llyn Melynllyn barbers hone, which I haven't used at all yet. I don't know whether to
    (1) Shave with the sharper Ator after only stropping it
    (2) Try honing the Ator on the stone, as the seller recommends, then stropping
    or
    (3) Practice honing on the cheapo.

    Most important to me is not damaging the blades, especially the new Ator, and having something which I can shave with. I guess some will say 'send the Ator to a professional for proper honing' but I've already spent more than I intended on shaving kit, and if possible I'd rather do it myself. Any advice gratefully received.

    (PS thanks to all for the wealth of information already here - great site, and I've lurked for a while and picked up lots of useful tips!)

  2. #2
    Senior Member Double0757's Avatar
    Join Date
    Nov 2011
    Location
    West Palm Beach, Florida
    Posts
    790
    Thanked: 179

    Default

    From the little I know, I would say try to send it to be professionally hone as soon as you can. If you don't have a shave ready razor, how can you know what you're shooting for with the barber hone you have?

    In the mean time I would practice with your cheep blade to see how would it improve. Before you do this watch all the honing videos in the wiki and then go for it with your cheep blade. Good luck! Double O

  3. #3
    Senior Member jeffegg2's Avatar
    Join Date
    Jul 2010
    Location
    Michigan
    Posts
    735
    Thanked: 104

    Default

    There is a catch 22 with new straight razor users. They want to learn to hone, but in order to be good at honing you have to "shave test" the razor. But if you don't yet know how to shave with a straight, then you can't tell if it is sharp. So what ends up is perhaps it is sharp, perhaps not... The hanging hair test is not by any means a conclusive test.

    Send your razor to be honed by someone that has experience. When you have experience, then learn to hone.

    Enjoy!!!
    Jeff.
    ScottGoodman and BigJim like this.

  4. #4
    Rookie
    Join Date
    Nov 2009
    Location
    Delta, Utah
    Posts
    372
    Thanked: 96

    Default

    Try it out and see would be my advice. I have a few eBay razors, none of which were described as shave ready, that are in use now. It seems to me that some sellers on eBay have gotten wise to the fact that there is a difference between shave ready and sharp, to make it easier on themselves they list things as not shave ready because they don't have a way to know since most don't shave with a straight anyhow.

    I would sanitize it, then try it, if it seems to pull a lot, try ten or fifteen light passes on your barber hone(after reading through the wiki and familiarizing yourself with the process), if it still pulls try a few more passes, if in the end you see no improvement, send it of to a known razor honer, since it is more likely that the bevel is not set right due to the fact that you see no improvement, there is a huge difference between refreshing a properly set bevel and building a proper bevel from scratch. A refresh I think anyone can do, a bevel setting anyone can do also, however not right from the get go it take a lot of practice.

    If after some tries, you find no succes and you send it off, but are still wanting to learn to hone you can always buy some homes and another eBay special and get to learning, by then you will have your shave ready razor to compare your tries against to let you know how you are doing.
    Last edited by Jasongreat; 01-28-2012 at 08:38 PM. Reason: Spelling

  5. #5
    Natty Boh dave5225's Avatar
    Join Date
    Mar 2007
    Posts
    1,462
    Thanked: 183

    Default

    I would say , strop it , and see if it shaves well . If it doesn't , then send it out to be honed . You really should have a properly honed razor , so you will know how a properly honed razor should feel .
    You could also buy a shave ready razor from the SRP classifieds , and leave the ebay stuff alone , until you know what you're doing .

    BTW , I see you live in the UK . You may want to contact Neil Miller . He's a member here , that lives in the UK . He sells strops , and razors , and I'm sure he could help you out .
    Last edited by dave5225; 01-28-2012 at 08:56 PM.
    Greetings , from Dundalk , Maryland . The place where normal people , fear to go .

  6. #6
    RazorBase DB application developer
    Join Date
    Jan 2012
    Location
    West Midlands, UK
    Posts
    299
    Thanked: 67

    Default

    Thanks, all. That sounds like good advice.

    I probably do need to get it properly honed by someone who knows what they're doing, so I will do that in the near future. However, since the 'not shave ready' Ator is already sharper than the one I started with, I might as well use it for a shave this evening (after a good stropping) and see what happens.

    I'll report back - thanks again!

  7. #7
    Senior Member blabbermouth Kees's Avatar
    Join Date
    Jun 2006
    Location
    The Netherlands
    Posts
    5,474
    Thanked: 656

    Default

    Amazon does sell razors that will never take a shave-ready edge. New razors hardly ever are shave-ready even if the manufacturer says so.
    Plus ça change, plus c'est la même chose. Jean-Baptiste Alphonse Karr.

  8. #8
    RazorBase DB application developer
    Join Date
    Jan 2012
    Location
    West Midlands, UK
    Posts
    299
    Thanked: 67

    Smile

    I've just tried the Ator and I can't see myself going back to the cheap one. This must be the closest shave I've ever had. I'm feeling deeply relaxed.

    After stropping, the Ator cut through the stubble very easily, without any of the tugging/scraping feeling that I had with the cheap razor. I only dared do WTG, but I did that twice and am very happy with the result. It's not perfect in the dip just between my jawbone and my throat proper, and I nicked myself a couple of times just under the chin, but all in all I'm well pleased with shave no. 5 and with the razor.

    I'd be interested to know what it would be like if it was optimally honed, but then I might be too scared to use it. :/

  9. #9
    Senior Member jeffegg2's Avatar
    Join Date
    Jul 2010
    Location
    Michigan
    Posts
    735
    Thanked: 104

    Default

    Quote Originally Posted by Matt69 View Post
    I've just tried the Ator and I can't see myself going back to the cheap one. This must be the closest shave I've ever had. I'm feeling deeply relaxed.

    After stropping, the Ator cut through the stubble very easily, without any of the tugging/scraping feeling that I had with the cheap razor. I only dared do WTG, but I did that twice and am very happy with the result. It's not perfect in the dip just between my jawbone and my throat proper, and I nicked myself a couple of times just under the chin, but all in all I'm well pleased with shave no. 5 and with the razor.

    I'd be interested to know what it would be like if it was optimally honed, but then I might be too scared to use it. :/
    Actually the sharper blade is easier on your face, and the dull blade more likely to cut you.

    Enjoy,
    Jeff.

  10. #10
    The Knight who says NI! mcgyver74's Avatar
    Join Date
    Oct 2011
    Location
    Jersey City, NJ
    Posts
    512
    Thanked: 32

    Default

    What brand is the one you got off Amazon? As was mentioned there are several that will never take a true shaving edge (B&B and Zeepk razors come to mind as pieces of crap) i bought a B&B off Ebay with a strop cheap and frankly all it's been good for is practicing honing strokes and as a cheese knife and the crap strop itself is more likely to dull the edge as naught... I now have a SRD strop that works great.

    The ERN is likely a much better quality razor, but you should send it to be professionally honed that way you are starting with a known good razor


    Another alternative is to go to Categories and get the sight unseen deal which includes a shave ready razor an strop kit that will work great while you learn.....

    Good luck!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •