Results 1 to 10 of 13
-
05-25-2012, 08:33 PM #1
- Join Date
- May 2012
- Location
- Graham Washingtom
- Posts
- 28
Thanked: 1Stropping, Hones and general razor care.
I have found it extremely relaxing to strop my razor, I have to stop myself from doing it too much (you can over do it, right?). Not to mention the satisfaction of seeing a imperfection in the blade, and fixing it.
But on the note of razor care, does anyone know of a good site I can buy a quality hone at a decent price?
Also, what types of oil should I use, as my house is rather humid, and I don't want my blade to rust. Is there a specific oil to use, or with anything work? W-D 40, gun oil, or something else?
-
05-25-2012, 08:44 PM #2
I use baby oil on my razors and haven't had a problem yet.
-
05-25-2012, 08:51 PM #3
- Join Date
- Mar 2012
- Location
- Frozen Wasteland, eh
- Posts
- 2,806
Thanked: 334As far as hones, head over to the classifieds section. I don't own any, but I'd be more comfortable purchasing one from a SRP member. Re: razor care, I've been using mineral oil for 15 years. If you are automitively-oriented, you could always try some WD-40, but YMMV
-
05-25-2012, 09:14 PM #4
- Join Date
- Aug 2006
- Location
- Maleny, Australia
- Posts
- 7,977
- Blog Entries
- 3
Thanked: 1587No, you really cannot over strop a razor so go for your life.
There are many reputable vendors who sell good hones - a bit of research around the place will show you who they are.
A light machine oil will do the trick - I use sewing machine oil.
James.
-
05-25-2012, 10:31 PM #5
Most everything you asked has been answered so I will just throw in that gun oil works well to. Been using hoppes number nine for years with no problems.
-
05-25-2012, 10:46 PM #6
Strop all you wish,no harm done. Baby oil is the most effectual for the money. For the occasional edge maintenance I would either check ebay or the classifieds for a quality barbers hone.
-
05-26-2012, 01:48 AM #7
- Join Date
- Mar 2010
- Location
- Boise, Idaho
- Posts
- 334
Thanked: 57The best bang for the buck is the Norton 4/8K. That's the only stone that you'll need. The 8K side will give you a perfectly usable keen edge. When you master it and money allowing for luxury, you can get the Naniwa 12K for smoooooothness. Those two stones are all that you'll need, accidents excepting. I wish someone had told me that when I started... would've saved me a lot of money.
-
The Following 2 Users Say Thank You to jbtusa For This Useful Post:
mapleleafalumnus (05-26-2012), MJC (05-26-2012)
-
05-26-2012, 04:27 AM #8
- Join Date
- Mar 2012
- Location
- Frozen Wasteland, eh
- Posts
- 2,806
Thanked: 334
-
05-26-2012, 05:23 AM #9
-
05-26-2012, 05:24 AM #10