Page 1 of 2 12 LastLast
Results 1 to 10 of 11
Like Tree2Likes

Thread: New to me razor. Now i need some advice.

  1. #1
    Junior Member
    Join Date
    Feb 2012
    Location
    San Antonio, TX
    Posts
    5
    Thanked: 0

    Default New to me razor. Now i need some advice.

    I finally purchased my first "real" straight razor. I was at an antique store in New Braunfels when I came across a Griffon CarboMagnetic in a secluded corner of the store. I'll include pics but it looked to me in much better condition than some other vintage razors I have come across and for $14 and I couldn't let it by. I found a strop there too in decent condition but a little aged obviously. Not sure how much of a deal or a bust this is but that's why I'm here. Now some questions.

    First,what do you guys think of the general condition of the blade? I will definitely get it honed but is it in pretty good condition or would I need to restore it a bit more than just a basic hone? Second, how would you guys suggest I clean my linen strop up for my first use? It has quite a bit of buildup from the previous owner, it looks like, and I don't want to ruin a shave ready edge by using this if its not ready. Any other advice would be great.

    Name:  Razor 2.jpg
Views: 310
Size:  41.5 KBName:  Razor 3.jpg
Views: 296
Size:  21.0 KBName:  Razor 4.jpg
Views: 310
Size:  14.8 KBName:  Razor 5.jpg
Views: 321
Size:  16.6 KBName:  Razor 6.jpg
Views: 303
Size:  19.1 KB
    Attached Images Attached Images  

  2. #2
    Pasted Man Castel33's Avatar
    Join Date
    Jul 2010
    Posts
    1,283
    Thanked: 269

    Default

    Looks to be in good shape. The toe could become an issue but if you send it out to be honed a honemiester should be able to work with it and even it out.

    Any pics of the strop?

  3. #3
    Junior Member
    Join Date
    Feb 2012
    Location
    San Antonio, TX
    Posts
    5
    Thanked: 0

    Default

    Yes it's a C-mon Blackie.
    Attached Images Attached Images     

  4. #4
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,737
    Thanked: 5016
    Blog Entries
    4

    Default

    A basic hone?

    That razor has some very serious issues with it. Much wear and some strange wear too. I would have to really inspect it to determine what it would need if it were mine but personally I would never have bought one looking like that but that's just me.

    Maybe with some creative restoration it can be brought back to life. Depends on the wear pattern and if it affected the grind.
    MickR likes this.

  5. #5
    Senior Member rodb's Avatar
    Join Date
    Apr 2008
    Location
    Saint Paul, Minnesota, United States
    Posts
    2,943
    Thanked: 433

    Default

    There looks to be a frown on the edge, it shouldn't be to bad to fix by someone who know how to correct for that. The rest of the blade needs some polishing tlc, but will probably look nice when done

  6. #6
    May your bone always be well buried MickR's Avatar
    Join Date
    Jun 2010
    Location
    Brisbane/Redcliffe, Australia
    Posts
    6,380
    Thanked: 983

    Default

    judging by the pics I'd be a bit dubious. As thebigspendur said, there is some strange wear patterns there. It would need to be evaluated by sight as to its worth as a shaver. i would also be a bit wary of that strop of yours. It looks a little bumpy in that second last photo. I think I would try again all up and look at whippeddog.com as a start.


    Mick
    Fender57 likes this.

  7. #7
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,948
    Thanked: 13221
    Blog Entries
    1

    Default

    This is one of the monthly beginners tips I do, it has some good tips on buying razors for restore

    http://straightrazorpalace.com/begin...eb-2011-a.html

  8. The Following User Says Thank You to gssixgun For This Useful Post:

    hozedaddy (07-08-2012)

  9. #8
    'tis but a scratch! roughkype's Avatar
    Join Date
    Oct 2010
    Location
    Durango, Colorado
    Posts
    2,080
    Thanked: 443
    Blog Entries
    2

    Default

    I have one of those razors, and it hones and shaves very nicely. Yours has seen some heavy-handed honing, unfortunately. A pro might be able to bring it back to life, but the honing would cost more than the blade had. It's your call whether you want to pursue the investment.

    Your strop could be a real winner. You can gently sand out any nicks in the leather side, and I'm pretty sure I've seen instructions for cleaning a linen strop here. Search the site for "cleaning linen strop" and see what you get.

    Best wishes, good luck, and welcome to SRP!

  10. #9
    Senior Member
    Join Date
    Aug 2010
    Location
    Vancouver, BC, Canada
    Posts
    1,377
    Thanked: 275

    Default

    I picked up an old C-Mon "Blackie" strop, just like yours. I don't use anything else, now. The bump in mine is slowly working its way toward "flat".

    Along with other poster, I think the blade may take some careful work. I think I see a "hook" where the edge meets the shoulder. That will mess up any honing, until the shoulder is ground down so that it's narrower than the blade width.

    Ah, the joys of inexpensive antique-shop razors . . . <g>

    Charles

  11. #10
    Member
    Join Date
    Feb 2013
    Location
    lodi ca.
    Posts
    50
    Thanked: 3

    Default

    i have two cmon blackie strops, great draw and great results. i may be vintage stuck but these old strops deliver
    Yeah, well, you know, that's just, like, your opinion, man.
    Big Lebowski

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •