Results 1 to 10 of 13
Hybrid View
-
10-18-2012, 03:56 PM #1
I use the light 3 in 1 machine oil on a make-up removal pad (SWMBO hasn't noticed yet...hehehe)
Obviously, you fold the pad over the SPINE of the bladeHang on and enjoy the ride...
-
10-18-2012, 04:11 PM #2
Mineral oil, Eucalyptus oil, or even thin coat of Vaseline on a cue tip.
Any day on this side of the flowers is a good day!
-
The Following User Says Thank You to Eekspa For This Useful Post:
sean121718 (10-19-2012)
-
10-19-2012, 03:04 AM #3
I appreciate the help guys.I'm going with the mineral because it seems easy enough and I'm a novice and the mineral oil should suffice and I only have 5 razors in my rotation....as always thanks guys
-
10-19-2012, 03:41 AM #4
Hey Sean,
Mineral oil works well, but it does tend to not stay evenly spread on the metal, especially if it's highly polished. It tends to bead up and collect in little pools. Some have had success mixing a small amount of bees wax in the oil. Here's a thread that tells about it. The pertinent posts are the first and last. http://straightrazorpalace.com/razor...revention.html I started to use it once, but had trouble finding bees wax. By the time my wife found it at a health food store I had bought the Renissance Wax. I now have a brick of bees wax so if you decide to try it and can't find bees wax, PM me with an address and I'll cut a chunk off and send it to you.
Regards,
Howard
-
The Following User Says Thank You to SirStropalot For This Useful Post:
sean121718 (10-20-2012)
-
10-19-2012, 04:39 PM #5
- Join Date
- May 2005
- Location
- Saint Paul, Minnesota, United States
- Posts
- 7,974
- Blog Entries
- 1
Thanked: 2204The number one rule is to make sure your razor is clean & dry before you apply anything.
If you don't then you will simply trap the moisture underneath and that causes rusting to start.Last edited by randydance062449; 10-19-2012 at 04:42 PM.
Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin
-
The Following User Says Thank You to randydance062449 For This Useful Post:
sean121718 (10-20-2012)
-
10-19-2012, 08:03 PM #6
+1 to randydance on that one.
Mastering implies there is nothing more for you to learn of something... I prefer proficient enough to not totally screw it up.
-
The Following User Says Thank You to tiddle For This Useful Post:
sean121718 (10-20-2012)
-
10-19-2012, 08:25 PM #7
-
10-20-2012, 03:25 AM #8
-
The Following User Says Thank You to SirStropalot For This Useful Post:
Havachat45 (10-20-2012)
-
10-20-2012, 04:25 AM #9
@ Howard...I appreciate that and I'll keep that in mind....i just might do that