Thread: Protect my Steel

My regular shavers I dry with make up removal pads...I blow real hard on the pivot bearing to get any water outta there. Make sure the inside of the scales are dry too. I don't store mine in the bathroom as it is so humid. If I ain't gonna use one for a while, I give it a light coat of mineral oil and put it in a wooden jewelry box drawer. In the drawer, I have 4 of those packs that come in pill bottles for the purpose of absorbing moisture. Desiccant packs I think they're called. Some guys make a point of not rinsing the blade during the shave, but rather keeping a towel or sponge on hand to wipe off the blade between passes. Good Luck.

Originally Posted by Wayne1963

My regular shavers I dry with make up removal pads...I blow real hard on the pivot bearing to get any water outta there. Make sure the inside of the scales are dry too. I don't store mine in the bathroom as it is so humid. If I ain't gonna use one for a while, I give it a light coat of mineral oil and put it in a wooden jewelry box drawer. In the drawer, I have 4 of those packs that come in pill bottles for the purpose of absorbing moisture. Desiccant packs I think they're called. Some guys make a point of not rinsing the blade during the shave, but rather keeping a towel or sponge on hand to wipe off the blade between passes. Good Luck.

Its called silica gell, it comes in new shoes and beef jerky amongst other things

Originally Posted by Wayne1963

I have 4 of those packs that come in pill bottles for the purpose of absorbing moisture. Desiccant packs I think they're called.

Originally Posted by edhewitt

Its called silica gell, it comes in new shoes and beef jerky amongst other things

Silica gel is a desiccant. Six of one, half a dozen of the other

Originally Posted by Jonah

Silica gel is a desiccant. Six of one, half a dozen of the other

Quite right, wasn't trying to be facetious, just giving a name for the product in case folks were looking for some and the packet only said silica gel on it but not desiccant. In any case no smugness or offence intended.

There are so many variables; the general environment where you live (Mobile Alabama I would consider a very humid environment), the environment where you store your razors (in the bathroom- not recommended!, etc.), the type of steel of your razors, how often you use your razors, etc. You will hear all sorts of things on this forum how guys get by with all sorts of things and never see rust. The last thing, believe me, you ever want to see is rust on one of your razors.

There are two easy things you can control; where you store your razors and how you clean/preserve them. What works for anyone else on this forum may not necessarily work for you. I would guess that you may want to consider oiling your razors right after rinsing and drying them. To clean. I rinse and dry carefully with a towel then with a cotton square. Then put on oil with an SRD oil applicator (not really necessary but it saves some time. Don't blow into the pivot. That's the equivalent of blowing steam into your pivot. Once you get used to it it takes no time at all to both apply the oil and to take it off. If your rotation is small this may be unnecessary. I like to use leather razor rolls. After a while, they pick up some of the oil you have been using and for those rare times you forget or don't have time to oil they sort of cover for you. They also "breathe" and help pull the moisture, if any is there, from the contents and wick it out. Just like shoes do for our feet.

Originally Posted by edhewitt

Quite right, wasn't trying to be facetious, just giving a name for the product in case folks were looking for some and the packet only said silica gel on it but not desiccant. In any case no smugness or offence intended.

No worries bud, all is well

Originally Posted by Wayne1963

My regular shavers I dry with make up removal pads...I blow real hard on the pivot bearing to get any water outta there. Make sure the inside of the scales are dry too. I don't store mine in the bathroom as it is so humid. If I ain't gonna use one for a while, I give it a light coat of mineral oil and put it in a wooden jewelry box drawer. In the drawer, I have 4 of those packs that come in pill bottles for the purpose of absorbing moisture. Desiccant packs I think they're called. Some guys make a point of not rinsing the blade during the shave, but rather keeping a towel or sponge on hand to wipe off the blade between passes. Good Luck.

I also stick to a towel to wipe between passes. As tempting as it is to rinse with the tap. I've found that using a towel will show you just how well you are shaving, especially after a long hiatus.