Looking for 30mm brush stand

**DOOM** · 09-16-2011, 02:59 PM

Hello Gents,

I bought a nice 30mm brush from penchetta and dont have a stand that fits. All my stands are for 22/24mm brushes and the biggest that I found online is 27mm. I'm looking for an acrylic, wood or other material and not expensive. Thanks

cheers
Dominic

**thebigspendur** · 09-16-2011, 03:51 PM

Well the not expensive part is the difficult one. Most of the ones I have seen are pretty small. You might check Classic Shave and SRD. I have a couple cheap acrylic ones that are larger and another metal/plastic from CM where you can enlarge the holder yourself. I know Dovo sells a large one but it is costly.

**cessnabird** · 09-17-2011, 07:20 AM

Go to Shaving Brushes, Men's Wet Shaving, Badger and Boar Bristles Brushes, Razors, they have a few large stands at decent prices.

**TonyN** · 09-17-2011, 08:48 AM

You can try Cutting Edge Razors. He makes acrylic brush and razor stands.

Home page

**sinnfein** · 09-20-2011, 11:26 PM

Do you think you can make one? Just saw a thread with one made by someone here and now my plan is to try when I get a chance (won't look as good as the one I saw but I'm still going to try)

**gssixgun** · 09-21-2011, 04:43 AM

I just took a normal stand, and the used the Dremel sanding drum around the inside, took me about 2 minutes to fit it

**easyace** · 09-21-2011, 06:05 AM

Originally Posted by gssixgun

I just took a normal stand, and the used the Dremel sanding drum around the inside, took me about 2 minutes to fit it

I did something similar with an acrylic stand, I just used a half round file to open it up.

**DOOM** · 09-22-2011, 12:06 AM

Thanks for all great suggestions guys!!!

I just contact Cutting Edge Razors and they can actualy customize stand, so I think I will go with them or I will do like Glenn and easyace say and take the dremel on a acrylic. Should tought about this... Thanks alot!!

cheers
Dominic

**TonyN** · 09-22-2011, 04:45 AM

Originally Posted by DOOM

Thanks for all great suggestions guys!!!

I just contact Cutting Edge Razors and they can actualy customize stand, so I think I will go with them or I will do like Glenn and easyace say and take the dremel on a acrylic. Should tought about this... Thanks alot!!

cheers
Dominic

Let us know how you like it once you get it!

**DOOM** · 09-22-2011, 07:52 PM

Originally Posted by TonyN

Let us know how you like it once you get it!

Sure, I will

Thread: Looking for 30mm brush stand

LinkBack

Thread Tools

Display

Looking for 30mm brush stand

The Following User Says Thank You to thebigspendur For This Useful Post:

The Following User Says Thank You to cessnabird For This Useful Post:

The Following User Says Thank You to TonyN For This Useful Post:

The Following User Says Thank You to sinnfein For This Useful Post:

Posting Permissions