Results 1 to 8 of 8
Like Tree35Likes
  • 24 Post By ScoutHikerDad
  • 3 Post By tintin
  • 1 Post By basil
  • 1 Post By RezDog
  • 3 Post By MikeB52
  • 2 Post By
  • 1 Post By

Thread: WB Horn and Bone Pair

Threaded View

  1. #1
    Senior Member blabbermouth ScoutHikerDad's Avatar
    Join Date
    May 2010
    Location
    Upstate South Carolina
    Posts
    3,308
    Thanked: 987

    Default WB Horn and Bone Pair

    So as I posted about in the Workshop, this is the WB Horn and Bone pair (don't worry, I'll spare you the obvious song reference that was going through my head the entire time I was working on this project, though it also gave me the inspiration for how to photograph them on our otherwise long-neglected piano lol!) The Celebrated Hollow Ground got the horn scales with a brass-lined camel bone wedge, and the Diamond Edge got the opposite: Austin's camel bone scales with a brass-lined horn wedge:
    Name:  WB Horn and Bone Pair Open Front.jpg
Views: 168
Size:  38.8 KB
    Name:  WB Horn The Celebrated Front.jpg
Views: 198
Size:  18.4 KB
    Name:  WB Bone Diamond Edge Front 2.jpg
Views: 156
Size:  27.8 KB
    Back side:
    Name:  WB Bone Diamond Edge Back.jpg
Views: 183
Size:  27.6 KB
    Name:  WB Horn The Celebrated Back.jpg
Views: 206
Size:  27.8 KB
    I left some character marks on both blades, as a) the carpal tunnel in my grading hand rebels after too much hand sanding, and b) the splayed deep gouges on The Celebrated look to me like someone once tried to use a sisal or maybe even a wire wheel on the blade face, leaving deep scratches on this otherwise beautiful blade that I'm not going after. She's got some miles on her, but she's curvy, which I dig.
    Here's a wedge view:Name:  WB Horn and Bone Pair Wedge End 5.jpg
Views: 192
Size:  19.4 KB
    Obviously I've got some QC issues to work out: both wedges are a bit fat, the front ends aren't evenly finished, the Diamond Edge got drilled and pinned a little low (I swear I was dead center when I committed the drill bit!), and I may have polished some compound into the microscopic bone divots that I can't seem to get out, but overall I'm happy with how they turned out. They pinned up nice and tight on both ends in the brass cup collars with brass pins. Plus, I learned a lot doing this that will serve me on future projects.

    Pivot end:
    Name:  WB Horn and Bone Pair Pivot Ends.jpg
Views: 214
Size:  13.9 KB

    Finally, this project provided a couple of firsts for me: the brass-lined wedge, and my 1st time using bone. Thanks Austin/AJ for the camel bone and walking me through how to work with it-now I know why it has to always be so thin! The brass liners I'm going to save for only the most distinctive razors like this, as it was kind of a PITA. As for the camel bone, it is a dream material to work in most respects, very intuitive and predictable (unlike how feathered horn can bow and warp!), and I already have my 2nd set from Austin ready for the right blade.

    Anyway, thanks for looking; constructive criticism is always welcome, as my goal is to learn a new technique and improve with every rescale I do.


    A-Aron/SHD

    edit: Oops, somehow my pics turned upside down-obviously my photography skills haven't improved! I'm gonna go get a generous glug of Laphroiag now and maybe come back to straighten them out.
    Last edited by ScoutHikerDad; 04-27-2019 at 11:43 AM.
    There are many roads to sharp.

  2. The Following 5 Users Say Thank You to ScoutHikerDad For This Useful Post:

    cheetahmeatpheonix (05-11-2019), Dieseld (04-27-2019), JOB15 (04-27-2019), markbignosekelly (04-27-2019), Steel (04-28-2019)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •