Thread: Westor Bros Anchor Brand Restoration

I just finished this today. All I need to do is hone it and shave with it.
Anyway here it is. I realize that the camera never lies. The horizontal scratch lines look awful up close. I did this all by hand and realize I should have used my Greaseless compounds on the wheel. I can't believe how awful the pins look close up under the camera lens. I gotta fix that. The wedge was glued in place and when it opened the wedge split but thankfully nothing broke off the wedge and I was able to glue the toe back into it's original position.Also, the area around the right hand side pin is a mess. The scales look to me like they were dipped in a shiny lacquer or glaze for the final finish. I'm not sure how to fix that other than trying some gloss lacquer.
All comments and suggestions welcome.
Thank you all.

Nice work. Greaseless is a double edge sword. It is aggressive but can easily wash out crisp lines and sharp corners.

Better to hand sand out stria by alternating your sanding directions in the lower grits. Sand in one direction with a backer, until all the previous directional scratches are removed.

I use a synthetic wine cork, wrapped in a 3x3 piece of 6mm craft foam or yoga mat. Yoga mats come in a variety of thickness and durometer which can produce different finishes and more importantly hand grip that can aid tremendously in hand cramping comfort. I also cut my sandpaper to 3x3 pieces to use the entire piece, just rotate a quarter turn for a fresh side. Quality sandpaper is cheap and does make a difference.

If you remove all the scratches then switch directions, using quality paper and switch frequently to fresh cutting side, you will get a better finish in a shorter time.

Once you take it to 600 or 1k finish you can polish by hand or buffer with compounds, I like Green Stainless and White finishing on a loose wheel.

You can buff the pins smooth with Green Stainless compound and sewn wheel. Go slow with lite pressure, alternating directions.

Man relax. You apologize too much. I think it looks pretty good! The things you pointed out could improve a little but you're aware of it so just go till you're satisfied. What you've done so far looks good and I think if you take Marty's advice it will be outstanding. I love those Wester Brothers blades and yours looks in good shape. Look forward to the SOTD with it.

I hope that came across the way I intended. I think you're doing fine. I too am my own worst critic sometimes but that is a good thing. We have all been a beginner. You have shown persistence and an eagerness to improve and that will pay off. In the end, unless you are selling razors or restoration services, you are the only one who has to be satisfied. It is good to strive for better but it sometimes sounds like you are beating yourself up over detail. If you don't have a deadline then just keep working at it until you're happy. I have razors I have gone back to multiple times to do modification or rework improvements. I think your work gets consistently better so I would suggest cutting yourself more slack. If it's a hobby then enjoy it. It defeats the purpose of having a hobby if you don't.
One word of recommendation. If you don't already have some get some 3M Marine Metal Polish. Especially for hollow ground blades where your room for sanding is limited it goes a long way to cleaning up and shining a blade without having to worry about scratches. It can be used on a wheel but I prefer rubbing by hand with a rag. That avoids rounding off the lines. It just keeps the angles clean and crisp.

There is a shop on ebay that has great collars for pinning with.
https://www.ebay.com/sch/ajkenne4xm3...88.m1543.l2654
There are a couple of others. These collars have great shipping prices to Canada and are great quality.

Hey Paul, I'm sorry man. I'll try to relax more!!
Oops, dang. lol

Hey Marty, anyway you can take a picture of your wine cork rig and post it? I understand what you're saying but like the saying, 'a picture paints a thousand words'.
Hey Rez, are those to be used instead of washers? or do my washers go underneath the collars then peen away?

Originally Posted by RezDog

There is a shop on ebay that has great collars for pinning with.
https://www.ebay.com/sch/ajkenne4xm3...88.m1543.l2654
There are a couple of others. These collars have great shipping prices to Canada and are great quality.

And he is a well respected member here.

Thanks Mike. I’ve never heard of that brand of metal polish but I’ll have a look at Canadian Tire and Home Depot. I have been using Mothers metal polish.

I would not sand on that New Science Concave, Rare bird.
All that will be gone. The great transition of the double-grind will be gone. So will the razor.
Leave as it is and lightly polish. Light stuff. Maas or similar. Preserve the etch.

Thanks sharptonn,
Rez, I ordered some of those dome collars and under washers.