Results 1 to 10 of 17
Threaded View
-
04-08-2009, 05:25 PM #1
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 26,987
- Blog Entries
- 1
Thanked: 13234Robeson Shur-Edge in Wenge with lifted Bolsters
This is Chad's second razor, a Robeson Shur-Edge, I used the tumbler on this one for most of the cleanup, to save the etching... These blades have a very faint etch the says "The Razor that Fits Your Face" it will disappear with even light sandpaper so I only used the tumbler and some high grit polishing compound on a buffer to bring back the shine......
The original scales were cracked in half and Chad wanted to try and keep the original Bolsters so I lifted them off the old scales and refit them on the new scales made of Wenge....
I re-used the original lead wedge from the old scales and fashioned new brass pins to put this one back together....
10 coats of hand rubbed poly finish went on the Wenge, then I polished that with RenWax after....