Results 1 to 10 of 10
Like Tree2Likes
  • 1 Post By Arrowhead
  • 1 Post By PaulFLUS

Thread: William Revitt razor

  1. #1
    Senior Member Arrowhead's Avatar
    Join Date
    Feb 2010
    Location
    Yorkshire, England
    Posts
    307
    Thanked: 96

    Default William Revitt razor

    Here's a pretty little Sheffield razor which I've owned for probably 20 years, and it's finally ready to be put to use. I'm indebted to Neil Miller for most of the work on the blade, including honing - all I did with it was the initial clean up to 240 grit and rebushing the pivot hole. The maker's stamp was never legible to me, and it's very nearly buffed out now, but Neil supplied the following information:

    "It's a very old blade, therefore probably a softer metal. Maker was William Revitt, of Stannington, Sheffield. His business was conducted from Meadow Street, and he first appears in the 1825 Sheffield Directory. There was a flood in Sheffield in 1865, and Wm Revitt claimed £4 10s 0d loss of property!"

    So, 150 years old, give or take. It's a shade over 1/2" at its widest, but it would be an exaggeration to say it was a 9/16".

    Scales are in ash retrieved from the bin at work (all right, I make sure that bits like that wind up as scrap...) and are bookmatched; the wedge is buffalo horn. The timber is quite iridescent, and changes colour as you turn it in the light, not that you'd know it from my photos.









    boz likes this.

  2. #2
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Nice job and I love the smile on that blade. A bit on the small side in width but a real beauty.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  3. The Following User Says Thank You to JimmyHAD For This Useful Post:

    Arrowhead (04-05-2010)

  4. #3
    Know thyself holli4pirating's Avatar
    Join Date
    Feb 2008
    Location
    New York
    Posts
    11,930
    Thanked: 2559

    Default

    I have a Revitt. Though nowhere near as fancy, she is one of my favorite shavers. A really really great blade.

  5. The Following User Says Thank You to holli4pirating For This Useful Post:

    Arrowhead (04-05-2010)

  6. #4
    CTHULHU FHTAGN! mbeem's Avatar
    Join Date
    Jan 2009
    Location
    New Hope, Alabama
    Posts
    570
    Thanked: 3185

    Default

    Beautiful razor!!

  7. The Following User Says Thank You to mbeem For This Useful Post:

    Arrowhead (04-05-2010)

  8. #5
    Member
    Join Date
    Dec 2009
    Posts
    43
    Thanked: 11

    Default

    I like a razor with character. Nice Job!

  9. The Following User Says Thank You to Villalobos For This Useful Post:

    Arrowhead (04-05-2010)

  10. #6
    The original Skolor and Gentileman. gugi's Avatar
    Join Date
    Aug 2007
    Posts
    17,410
    Thanked: 3906
    Blog Entries
    1

    Default

    nice razor
    here's mine old patina - Straight Razor Place Forums
    and here's the reference i've found about them
    W. Revit: Does Anyone Know Anything About This Razor? - Straight Razor Place Forums

    actually look at the rest of that second thread, you may like it

  11. The Following User Says Thank You to gugi For This Useful Post:

    Arrowhead (04-05-2010)

  12. #7
    Senior Member Arrowhead's Avatar
    Join Date
    Feb 2010
    Location
    Yorkshire, England
    Posts
    307
    Thanked: 96

    Default

    Thank you all for the kind comments, and to Gugi for the links which were well worth following. My guess, based on the tang style and the remains of the stamp is that I have a later razor, nearer to 1860 than 1820. The stamp reads "Wm Revitt Patent Temper", by the way. The original scales were black horn, but too dog eared to reuse in my opinion: the new ones are a straight copy as regards shape and thickness.

    I had an acceptable shave from this last night, but the cutting angle is a little steep (Neil had trouble with the edge flaking and had to go up to three layers of tape - I might do the trigonometry some time but it's got to be over 20 degrees). I expect matters will improve somewhat over the next few stroppings as the edge smooths out some more. It's very much at the wedge end of the spectrum - very quiet on the strop and practically silent when cutting whiskers. It feels tiny in my hands (don't know where to put all my fingers!), but the width is fine, not that much of a jump from my customary 5/8 razors.

  13. #8
    The Great & Powerful Oz onimaru55's Avatar
    Join Date
    May 2008
    Location
    Bodalla, NSW
    Posts
    15,595
    Thanked: 3747

    Default

    Looks a winner. Beautiful timber.
    “The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.”

  14. The Following User Says Thank You to onimaru55 For This Useful Post:

    Arrowhead (04-07-2010)

  15. #9
    Junior Member
    Join Date
    Jan 2024
    Posts
    2
    Thanked: 0

    Default

    I'm an ancestors of William revitt he was one of my great grandfather many years ago after doing my family tree i found i was related and I'm trying to get one of his razors and franks .

  16. #10
    Senior Member blabbermouth PaulFLUS's Avatar
    Join Date
    Dec 2018
    Location
    Gainesville, FL
    Posts
    5,870
    Thanked: 594

    Default

    Hi and welcome. You have come to the right place for information and hopefully someone will be able to guide you in finding a good example for your namesake collection.

    That's always nice to know that kind of history about your family and even nicer to have a physical item to have and display. I know what you mean as I have some fairly noteworthy ancestors one of whom was a signatore of the Magna Carta. I always say its cool bragging rights but it never made me a dime.

    Anyway, best of luck to you in your search. I do not think that I personally have any but I will check and also keep my eyes open. Here though is another source of information you may find interesting and useful.

    https://www.hawleysheffieldknives.co...val=r&kel=1042

    And also this.

    https://sha.org/assets/documents/Tra...0Tableware.pdf
    Iron by iron is sharpened, And a man sharpens the face of his friend. PR 27:17

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •