Evolution of a W Greaves&Sons Sheaf Works

[cannonfodder]

It has been a while since I stopped to do any work for myself so I finished up some wood working tonight and decided to dig through my to do project box. I piked up this Greaves razor several months ago. It is a 6/8 wedge with some moderate rust on the blade. The scales are actually in good shape but the entire thing needs depined to properly restore. I do not want to take the W.Greaves&Sons stamp off blade but it needs some extensive work to properly clean the blade. So Gingerly removed the scales and started working.

First it got a scraping to take off the flake rust

A pass on the 180 greaseless compounds to knock off the worst of the rust.

Then the 400 grit to clean it up a little

Then the 600 compound to start cleaning everything up.

Now for the long and tedious part. Hand sanding. It will get a progression of paper starting at 600 grit and going up no less than 8000 grit possibly higher before I start the buffing compound work.

Stay tuned. More to come

[baldy]

Looking good. Cant wait to see your progress.
Grant

[eTom]

well done, nice looking blade.
Please give us an update.

[whavens]

I am in the process of restoring an old Wostenholm pipe and am interested in your progression. Was going to try to do it all on the buffing wheels, but might have to break down and hand sand it as well.

[hcintineo]

blade looks like its coming along nicely. good luck with the project!

[cannonfodder]

It is all a matter of what you want. You can run all buffing and get perfectly acceptable results, but I am after more than perfectly acceptable. I find that I get better final results when I hand sand after the wheels. I wrap the sand paper around a dowel rod, sit at a table and slowly sand for a few hours. It flattens out and smoothes the steel better which will get you a more mirror like finish verses a nicely polished finish. For that matter, I could pin and hone it after the 600 and it would shave perfectly acceptable. The greesless compounds are the paint sprayer of the process. It does a lot very quickly but the quality is in the details and there is no substitute for hand work. It makes the difference between good and wow.