Results 11 to 19 of 19
Thread: Marsh & Brothers co. Ponds Works
-
07-25-2011, 02:41 AM #11
Nice Job!!
Glen!
Great Job!
However when I show it to Connor he's going to be champing at the bit for the custom scales that he wants for his 8/8 Friodur!! He's saved his summer wages and really wants you to make him a custom set!!
Again as always, Great Work!!Our house is as Neil left it- an Aladdin’s cave of 'stuff'.
Kim X
-
The Following User Says Thank You to cudarunner For This Useful Post:
gssixgun (07-25-2011)
-
07-25-2011, 03:48 AM #12
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 27,025
- Blog Entries
- 1
Thanked: 13245
-
07-25-2011, 10:47 AM #13
Glen, move this post if you need to. Here are a couple of pics of the razor. You can just make out from the pic that the blade is thinner than the tang. The blade looks as though it used be a much larger blade 8/8 or 7/8 maybe and has been ground or worn down.
The pivot was really lose and I think that the third pin may have been an 'after market' add on. On side is a flat-head screw with a brass nut on the other side.
-
07-25-2011, 01:27 PM #14
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 27,025
- Blog Entries
- 1
Thanked: 13245Yes I would agree with your assessment Stu, this was a larger blade (#14 = 8/8 most times) in the beginning, and most likely the 3rd pin was Jury Rigged in there for the special purpose of keeping the razor from falling through.. You could check that out and see... My first thought is that since you are building custom scales for it you can also custom fit them... You might not even need the 3rd pin.. Also that spacer they used is huge !!!!... I would try building the scales with no 3rd pin planned, then you can add it after for function if needed, or for your pleasure if wanted.
PS: Not to worry about the thread straying, if we restorers can't help each other out here, all we have is pretty picturesLast edited by gssixgun; 07-25-2011 at 01:53 PM.
-
07-25-2011, 01:48 PM #15
-
The Following User Says Thank You to Titivillus For This Useful Post:
gssixgun (07-25-2011)
-
07-25-2011, 02:01 PM #16
Just beautiful. I always look forward to seeing new pics of your work.
"If you ever get the pipes in good chune, your troubles have just begun."--Seamus Ennis
-
The Following User Says Thank You to Durhampiper For This Useful Post:
gssixgun (07-25-2011)
-
07-25-2011, 02:42 PM #17
Another beautiful jog. You have a knack of making razors look incredible. Thanks for the pics.
-
The Following User Says Thank You to whavens For This Useful Post:
gssixgun (07-25-2011)
-
07-25-2011, 05:37 PM #18
That's my baby!
Glen, you are truly a Master Craftsman. I couldn't be happier with the way it turned out & I thank you very much for it. You seem to treat everybody's razor as if it were your own. That is why I chose you for this family heirloom that I can pass on. My Great Grandfather would be very proud if he could see how it turned out. Thank you again for your superb work! - Roxojax
-
The Following User Says Thank You to roxojax For This Useful Post:
gssixgun (07-25-2011)
-
07-25-2011, 08:41 PM #19
Lovely work G-man! This one looks awesome and I really like the wedge shape.
-
The Following User Says Thank You to Stubear For This Useful Post:
gssixgun (07-26-2011)