Results 1 to 9 of 9
  1. #1
    Senior Member
    Join Date
    Mar 2011
    Location
    Croatia
    Posts
    361
    Thanked: 46

    Default Few words about Croatian Bog Oak ("abonos" or "morta")

    Very soon I plan to make few shaving brushes from Croatian Bog Oak (in Croatia we call it "abonos" or "morta") so I want to say few words about it:

    Bog oak is a very specific material. The trunk (or root) of oak wich lay uder the ground for thousands of years, having been washed by the river water and precipitated with mineral.
    When the trunk gets trapped by its branches and roots to the river bed, in time it becomes covered with the layers of mud, sand and gravel. Deprived of oxygen the wood undergoes the process of fossilization and a long process of Bog oak formation.
    The centuries-long process of timber change, often termed “maturation” results in colour alteration from golden-brown to completely black, and its hardness is incrased to such a level that later it can only be carved with the use of specially grind and exceptionally firm tools.
    The time necessary for the oak to transform from the end of its biological growth to Bog oak is various. Acccording to the conditions under which “maturation” takes place, this process can last two, three, or seven thousands years. Due to the ecological reasons menitioned above no two trunks can be found of the same colour.
    Bog oak is found in the entire dark and its pulling out of the water is in fact the first sight of it after many thousands of years. The age of Bog oak found in Croatian rivers ranges from several hundred years in the rivers on the southern part to the oldest retrieved so far in the river Krapina being 8290 years old.
    Aesthetic effect of Bog oak is based on the very experience of naturally formed colour, noticeable wood structure, its “imperfect” appearance, and the fact that parts of the wood are combined which by their variation in the colour, directions of growth rings, or certain “damage” convey a strong aesthetic and ethical message about the immensity of the past times. Deep impression of the passing of time is also grounded on the knowledge of longevity of wood and the miracle of its intactnes indicates that wood is not affected by usual weather conditions or vermin which naturally spoil the looks and strenght of wood. Semidry Bog oak wood is exceptionally hard, sometimes of the golden or copper colour, or with a tint of some other hue. Older wood can be completely black.

    FAQ:

    Q: Has there been any wood- dating analysis done?

    Wood dating is usually done for the samples taken from a single site, and carbon-14 method is used for the analysis. Analyses are performed at the Ruđer Bošković Institute in Zagreb, Croatia, or at an Institute in Ukraine. Collaboration has also been established with Cornell University within their project of climate change investigation, and they have been sent a few hundred samples for analysis. This proved to be one of the crucial points in data collection as, in addition to all the above, the age of all wood samples obtained has been confirmed.

    Q: Why is Bog oak such expensive material?

    Bog oak is a material which is very difficult a) to find, b) especially good quality Bog oak, c) to extract from the water, and d) to dry in a proper manner as well as to process. We in Croatia are definitely lucky to abound in very high quality material, which is the result of exceptionally good quality oak. The basic challenge is how to dry the wood, which is completely soaked with water, and at the same time avoid the splitting of the wood structure. The drying process takes at least two to three years; however, the rate of discarded material is very high.



    Last edited by KING2011; 08-14-2011 at 11:12 PM.

  2. #2
    Senior Member
    Join Date
    Mar 2011
    Location
    Corcoran, Minnesota
    Posts
    665
    Thanked: 170

    Default

    I hope you post pictures when you get some brushes done - sounds really interesting! My guess it could be really hard on tools. Good Luck!

  3. #3
    Know thyself holli4pirating's Avatar
    Join Date
    Feb 2008
    Location
    New York
    Posts
    11,930
    Thanked: 2559

    Default

    I'm sure bog oak would make a beautiful brush handle, but I prefer pipes. I didn't know it was used for anything else.

  4. #4
    Senior Member
    Join Date
    Mar 2011
    Location
    Croatia
    Posts
    361
    Thanked: 46

    Default

    Quote Originally Posted by skipnord View Post
    I hope you post pictures when you get some brushes done - sounds really interesting! My guess it could be really hard on tools. Good Luck!
    Yes, it is very hard and it have to turn on low RPMs

  5. #5
    Senior Member
    Join Date
    Mar 2011
    Location
    Croatia
    Posts
    361
    Thanked: 46

    Default

    Quote Originally Posted by holli4pirating View Post
    I'm sure bog oak would make a beautiful brush handle, but I prefer pipes. I didn't know it was used for anything else.
    My source for Bog Oak is a custom pipe maker. Brush handles are sandblasted and they have wood pattern like sandblasted pipes.
    Here is Croatia there is a maker who produce luxurious furniture from Bog Oak also.

  6. #6
    Senior Member Zelenbakh's Avatar
    Join Date
    Feb 2011
    Location
    Moscow, Russia
    Posts
    411
    Thanked: 125

    Default

    There is quite a lot of this type of wood in Russia. Not only oak, but pine and few others. After spending in water many years they become strong and beautiful. I have some items made of this wood, very beautiful. Brush handles will be very nice.

  7. #7
    Senior Member
    Join Date
    Mar 2011
    Location
    Croatia
    Posts
    361
    Thanked: 46

    Default

    Quote Originally Posted by Zelenbakh View Post
    I have some items made of this wood, very beautiful. Brush handles will be very nice.
    Exactly, the surface pattern is very nice and touch feeling is something special.

  8. #8
    Senior Member RobertH's Avatar
    Join Date
    Jan 2010
    Location
    Fall River, NS
    Posts
    266
    Thanked: 58

    Default

    I also would love to see pictures of your finished product, looking forward to it.

  9. #9
    Senior Member
    Join Date
    Mar 2011
    Location
    Croatia
    Posts
    361
    Thanked: 46

    Default

    Quote Originally Posted by RobertH View Post
    I also would love to see pictures of your finished product, looking forward to it.
    The brushes will be in my Vendor corner in next 9-11 days.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •