Results 11 to 20 of 23
Thread: Dovo 140 in Olivewood
-
11-01-2011, 04:10 AM #11
Nice. Beautiful blade and a very tidy job with the scales. Really well done.
-
11-01-2011, 01:50 PM #12
- Join Date
- Mar 2011
- Location
- Washington DC Metro Area
- Posts
- 468
Thanked: 114Thanks for all the kind words, guys. Not sure they are warranted, but I’ll take them. :-)
As for working with olivewood, I haven’t worked with enough wood types to give you a comprehensive comparison. What I can say is that working with olivewood is relatively straightforward. The wood cuts and sands well and takes a great polish – you might be surprised how beautifully it buffs up even without any finish. The wood is hard, dense, and abrasion resistant. Yet it’s not too dense that it’s difficult to work. Comparing the olivewood to, say, the ironwood I originally contemplated, the ironwood is much harder IMO and takes significantly more effort to sand to the proper thickness. As a bonus, olivewood smells good.
My only difficulty was keeping the light wood from getting discolored by metal shavings when shaping the wedge. But I don’t think olivewood performs any different in this regard compared to other light colored woods.
Overall, I enjoyed working with olivewood. Give it a try.
-
11-03-2011, 10:35 AM #13
Top notch! Those are sweet scales!
-
11-03-2011, 01:05 PM #14
Beautiful razor and scales. Nicely done!
I'm a sucker for a stamped tail. Giggity.
-
11-04-2011, 02:19 AM #15
I have this exact same razor but still in the blue horn scales. ( It was actually a contest prize, given generously by SRD, thank you again!) Seeing this razor in those scales is really remarkable. The gold plating is complimented so well by the color of the olive wood. Excellent work!
-
11-04-2011, 02:28 AM #16
It does look better now Enjoy, Alan!
My favorite part of olivewood is the smell, I always want to lick my livi.
-
11-04-2011, 07:22 AM #17
- Join Date
- Aug 2008
- Location
- Pothole County, PA
- Posts
- 2,258
- Blog Entries
- 2
Thanked: 522This is a wonderful example of patient craftsmanship. Well done and let's see more.
JERRY
OOOPS! Pass the styptic please.
-
11-04-2011, 07:29 AM #18
- Join Date
- Aug 2008
- Location
- Pothole County, PA
- Posts
- 2,258
- Blog Entries
- 2
Thanked: 522Diyguy
By the way, your photography is very impressive as well. I am envious.....
Jerry
____JERRY
OOOPS! Pass the styptic please.
-
11-04-2011, 02:28 PM #19
- Join Date
- Mar 2011
- Location
- Washington DC Metro Area
- Posts
- 468
Thanked: 114Thanks for the replies everyone.
I particularly appreciate MrSell63’s photography comment. I have no photography background at all and taking pictures is one area that’s a huge challenge for me. There is definitely a learning curve associated with photographing razors!! Getting quality pictures can be quite frustrating.
I was lamenting recently that I might have to break down and buy a more advanced camera, but Jerry’s comment makes me think that perhaps my current setup is working OK?? I’m currently using a cheapie point and shoot camera, but I do the following:
1. A light box helps tremendously. I originally built my own DIY version, but it didn’t work as well as I desired. I ultimately bought an inexpensive light box off of eBay. It works better, but it still was not perfect. It came with two high lumen lamps, but I ultimately found that I needed to add three more (five spotlights in total: one directed through each side, one from the top, and two in front bouncing indirect light off of the inside top and sides of the box). The collection of cords and lamps is pretty comical looking and takes forever to setup and take down!
2. I also changed three settings on my camera: a) turned on the macro setting (to improve close-up focusing), b) turned off the flash (to reduce glare), and c) added a two second delay (to keep the camera perfectly still).
3. Lastly, I use a small tripod. With the tripod and the two second delay, the camera can be held perfectly motionless for each picture.
The above setup has been working reasonably OK for me so far, but in full disclosure I still have to take about 50 pictures to yield five quality shots. 90% of the pictures still contain glare spots or are out of focus or focused on the wrong area (for example, focused on the blade when I was trying to focus on the wedge).
If there are any professional photographers reading this, I’d welcome feedback on how to improve my setup.
Thanks again for the kind words everyone!
-
11-04-2011, 04:31 PM #20
- Join Date
- Mar 2011
- Location
- Corcoran, Minnesota
- Posts
- 665
Thanked: 170Ultimately, what is important is results, and yours are excellent! I particularly like how your method represents your DIY handle. You figured out what you needed, and built your own light box setup. My kind of guy! And, the razor is lovely. Olivewood is one of my favorites.