Twisted Oak's Ongoing Restorations Thread

[Ingiald]

Great work, i especially like that wostenholm

[U2Bono269]

I love your scale designs. Very sleek.

[TwistedOak]

Here is a reworked J.A. Henckels Twinworks 401. The first picture is the old set of scales I made for it. The new set are Wenge with brass pins/washers and purpleheart wedge.

Before


After

[TwistedOak]

Next is a C.F. Schwartz & Co "Sensation" 85. The blade was actually pretty clean before except for some pitting, the scales were crumbling away at the pivot and the wedge didn't come close to fitting. I think someone tried rescaling them and didn't do too well.

Scales are curly maple with brass pins/washer and purpleheart wedge.




Next time I will have The Diamond Razor Co.

[TwistedOak]

This is The Diamond Razor Co. from Boston Mass. Scales are curly maple with a curly maple wedge. Brass pins and washers. I either made the wedge too angled or used less glue than usual, but as I started pinning the pivot the toe side separated as you can see in the picture. Then as I tried tightening the pivot to an acceptable level the show side pin head split somewhat from too much material being left for pinning. So the scales started out looking very nice but then everything fell apart as I assembled it...
Pics:
Before

After





and my favorite part, the little tear drop that stayed throughout the sanding/shaping process:

[TwistedOak]

I hadn't realized it had been so long since I added to this thread. I've been accumulating a cigar box full of razors in need of restoration. I finally managed to clean up a couple...
The first is a Wade & Butcher Special 6/8, kept the original scales repinned the pivot with brass.
Before


After




This Gold King, Made Exclusively for Gustav Kaiser, was a quick clean up. I polished up the blade (losing what was left of the gold wash) and the scales, then repinned both ends in brass. Unfortunately, the previous owner was a bit sloppy trimming the wedge and filed deep scratches to the inside of the scales.
Before


After

[Hirlau]

Great job,,, I don't know how I missed the one you posted last year,,so I put a like for that one too.