Thread: Heljestrand MK33 in ivory and tortoise

Nothing clever with the title. Finally got around to finishing this one, and it's definitely one of my favorites now. The scales are brass-backed paneled ivory and tortoise with a silver wedge. Project details in next post.

Ok here's the build details. This was my first attempt at lined scales so it was a little rough and took over 7 hours, but I'm pleased with the results. The ivory came from a bag of pre-ban scraps from a music instruments source here in the US.

Original cheapy plastic scales. Also shown is the pair of tortoise scales I cannibalized to get the panels (it doesn't look like it, but these were too far gone with damage to be used as whole scales). LOTS of designs, but I settled on a simple 3-panel:



Brass liners cut out:



Ivory and tortoise panels cut and roughly shaped:







Holes drilled. The ivory was epoxied to the brass. The tortoise was not because it's transparent in parts:



After everything was placed, the panels were riveted in with peened and sanded nickel silver or brass rod, and the scales were shaped and sanded. I did end up cracking one of the ivory panels but it's very small and should be stable in the long run:



Not shown: From an old beat up 'blank' I also cut down some (real) silver to use for the wedge. Cost me 25 cents, if you know what I mean. That was shaped and polished, and everything was test pinned. I had to mess with the alignments for about an hour as the scales didn't flex like normal scales due to the panelling. But finally everything came out alright and I finished everything up. I'm very pleased with how everything turned out, but I learned a lot and thankfully have enough materials to try it again on another razor, this time with knowledge.

Fantastic comes to mind,great work.

Nicely done. The tortoise breaks up the ivory nicely and gives it a cool look.

Great look, thanks for sharing the built as well, Enjoy!

Oh! That is very nice work! Thanks for the build pics and description! It looks awesome!