Results 1 to 10 of 27
Threaded View
-
06-05-2015, 10:44 PM #15
These are the ones I made last week, and put together today. I used to tag on rebar or mild steel, but the Howard Clark Damascus I got is special enough that I don't wat to waste an inch. The tongs are made from mild steel.
1) ned it L shaped.
2) flatten the short bit of the L
3) fold the short bit over itself and back around, so that you get a T
4) hammer the short bit flat, flux it, and then forgeweld at welding heat. (heat and hammer a couple of times for a good weld)
5) fold the ends of the T into a U shaped box.
It is ugly, but gets the job done. The stock is rock solid and doesn't budge a hair.
First pic is empty, second pic is holing half of the damascus I worked with today. The other half was forged to a razor blank, and currently annealing
Til shade is gone, til water is gone, Into the shadow with teeth bared, screaming defiance with the last breath.
To spit in Sightblinder’s eye on the Last Day
-