Close but no cigar...
I got the edge thin enough 0.15mm... but theres some 60grit scratches that will probably make the blade disappear... and the edge wanders over from the one side to the other by about 0.3mm.
The grind is too high... so the ratios are just over 4:1... so all in all i could set a bevel and get a decent edge with 3 layers of tape. With that the ratios are just more than 3.5:1... it has popped arm hairs off easily since my 800 grit bevel setting stone... i have since managed to strop it blunt again...

This will be my razor, until i can build me a better one, as it really shouldnt leave the house...

It is much better than the other one i use... it can do a wet against the grain hht... mostly so there is room for improvement...