Results 1 to 10 of 27
Thread: Ready for he HT! New file work
Hybrid View
-
02-05-2016, 04:44 AM #1
- Join Date
- Nov 2012
- Location
- Across the street from Mickey Mouse in Calif.
- Posts
- 5,320
Thanked: 1184For the push button controller which is another 250 ? I looked at that but not sure I need a controller with bluetooth and usb so I can reset temps and change times while I am at Starbucks :<0) I got the Rampmaster and after it shipped I saw the vids with all the preset cone temps on RM2 and panicked. When it got here it had Rampmaster 3 with old style temp settings phew . If you saw me unbox mine I missed the plug that covers the top vent hole. Don't throw away the packing till you find it .It was inside some of that foam stuff. Almost missed it.
Good judgment comes from experience, and experience....well that comes from poor judgment.
-
02-05-2016, 04:56 AM #2
Ah! I thought I had missed out on something... Someone was telling me only an extra hundred bucks for it...: $250? I dunno if I would pay that much more... Yeah I'll have to check the packing for that
-
02-06-2016, 07:44 AM #3
If I may make a suggestion: stop using scribe lines, and start using your eyes.
If you look at your razor from different angles, and along the edge, you will see a lot more than a scribe line ever could, and you can easily tell if the edge is straight or crooked. Also if you want to keep an eye on the geometry while you are grinding, all you need to do is just lay it flat on your bench, and keep an eye on how the razor would 'roll' if you were honing.
I used to make scribe lines when I was making my first razors. But the problem I was facing was that I forge my razors, so it is not possible to make scribe lines and measure parallel lines or right angles. Learn to look at your razor, and you'll start seeing everything you need to know. Scribelines and jigs are crutches imo.Til shade is gone, til water is gone, Into the shadow with teeth bared, screaming defiance with the last breath.
To spit in Sightblinder’s eye on the Last Day
-
02-06-2016, 03:32 PM #4
-
02-06-2016, 03:42 PM #5
- Join Date
- Nov 2012
- Location
- Across the street from Mickey Mouse in Calif.
- Posts
- 5,320
Thanked: 1184Bruno is right there and I would also suggest you watch the stria as you grind. Your scratch pattern will show you what your doing as you do it. Nice and even scratches means nice and even lines. Now just think of everything at once and go for it LMAO.
Good judgment comes from experience, and experience....well that comes from poor judgment.
-
02-06-2016, 03:53 PM #6
Definitely avoid jigs especially when you are a newbie. First learn the hard way which is free hand. Get your technique going. Once you master everything you will be in a much better position to know what works for you and what you need to do to achieve something. Trying to lose a bad habit or technique is very hard as everything we do is muscle memory. A few big names and makers once told me, first grind your first 100 razors and then we'll talk again.
əˌfisyəˈnädō | pərˈfekSH(ə)nəst | eS'prəSSo | düvəl ləvər
-
02-07-2016, 03:13 PM #7
Hahaha, best advice I've gotten in a while!!!! Lol
First and foremost I would like to say I absolutely love ur work max! I have so many of ur razors actually saved before I really knew it was u... Noticed I favored these razors with "max" etched on them used the Google machine and found max speecher...
That's kinda what I was thinking about going without the scribe lines...only makes sense to do it with everything! I'll see what u can do on my next razor... I'm going to be starting it today!!! Thanks guys!