Results 1 to 10 of 15
Thread: diy blade?
Threaded View
-
04-09-2010, 05:29 AM #7
- Join Date
- May 2005
- Location
- Saint Paul, Minnesota, United States
- Posts
- 7,974
- Blog Entries
- 1
Thanked: 2204Take a piece of steel 1/4" thick x1" wide and 7" long
use 1084,1095 or O1 steel
anneal the steel
draw a patten of the razor on the steel
drill the pivot pin hole in the tang
cut/grind/ sand away anything that does not resemble a razor
taper the tang & polish
hollow grind the blade till the edge is 1/16 - 1/8 thick
polish the spine
normalize,heat treat & temper the razor
finish grinding/sanding/polishing the blade
make the scales & attach
hone the razor
Thats it!Last edited by randydance062449; 04-09-2010 at 05:34 AM.
Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin