Thread: Post heat treat grinding/ regrinds/learning how

Hey Joe,
Im new to this aswell,
First get rid of that tape
Build yourself a little platform to the CL of the contact wheel
Get it running with a crappy belt and (using the grinder as a lathe) using a wood chisel crown the wheel from the back side of the running belt.
That will at at least true it for you.
My contact wheels are not crowned, but I used this method to true them (no lathe here)

The shoulders seem to be the trickiest part. I used to used to tighten a 1/2" bolt onto the tang so the edge of the bolt/nut to stop myself from feeding the razor too far in and wrecking the shoulder.

Hopefully some pros will chime in.

Good luck Joe!

Eric.