Hello to all you SRPers. I just joined SRP today, and you don't know how happy I am that I found this place (keep reading).
First, my introduction with a relevant bio, then some questions.

My name is Mike, going by the username of "eagle" here at SRP.
I'm 45, and I have been shaving with a straight razor for about 25 years. I have always been interested in the old ways of doing things (18th century woodworking tools, fountain pens, muzzleloaders, etc.) and as a young boy scout growing up in a rural area I had plenty of experience sharpening and using knives. I obtained my late grandfather's straight razor during my college years and began trying to shave with it. I used conventional shaving cream and the first couple of times I tried the razor I only got part way through before losing my nerve. However, I really liked the elegant simplicity, self reliance, historical, and environmentally friendly aspects of using a SR, so I kept trying off and on. I didn't know anyone else at the time who used a straight razor, so experience has been my teacher and more recently, whatever web info I found. I eventually cultivated the skills to get a complete, satisfying, close shave. I love using a SR -- better shaves than using anything else. I also love people's reactions when I tell them what I use to shave with. Now, I wanted to preserve my Grandfather's razor for future generations, so shortly after I began using that razor, I bought one from Hoffritz. It has Spain stamped on the tang so I guess the quality is not too bad. I also picked up what I thought I needed to maintain both my razors from a Chesapeake Knife and Tool store. The store clerk said I should use a surgical black arkansas stone with honing oil, and I also got an Illinois strop. The new razor shaved like a dream, but of course after time I needed to hone it. I honed my razors according to the instruction I got from the store clerk. I oiled up the stone, laid the razor diagonally on the stone so as to have the whole edge on it, then put my fingers on the side of the blade in the hollow grind but near the edge (using all four fingers on the blade). I was told to use some pressure on the razor when going forward (edge first) then very light on the return. He instructed me to use that up and back stroke 70 times on one side, then flip the razor over and do the same on the other side. Return to the first side and do 60 strokes, flip and do 60 more... The progression was to decrease the count by 10 each time until I reached 20 then drop to 15, then 10, then decrease by one until I was done. I would clean the oil off and strop. This is how I have honed my razors for most of all those years. Following this procedure I was able to maintain what I call an adequate edge for shaving -- nothing like that silky feeling of the razor when it was new, but at least not irritating either. Although, totally by accident one day, I did achieve that kind of an edge on one of the razors once. Couldn't duplicate it, but it was really a pleasure while it lasted. Over the years I've tried varying the strokes, using just the weight of the razor (no fingers on it). Nothing was any better, and I would return to how I always did it. Then I got a King 8000 water stone. I thought I'd finally get that silky dream shave now. I experimented, using the
water stone after the arkansas black. It put a wonderful mirror finish on the razor, but it was significantly duller -- to the point where I couldn't shave with it. I tried varying everything I could think of to no avail. Lately, I picked up an ultrafine white ceramic stone and have used that lightly after honing with some success. I use it dry for a few strokes with pressure and lightly. But I've never been able to get a nice edge; just good enough to shave with and not cut myself (still better than the disposables). A while back I found the classicshaving web site, so I knew I could have Lynn hone my razors (if I haven't destroyed them with my neanderthal honing methods). And that would be great for a while, but I really want to be able to do it myself and achieve a really comfortable edge. Now I have found SRP, and have hope that I can get the instruction I need. I've had my eye on a Dovo with tortoise scales for some years now, but I won't let myself get one til I can properly maintain it. From what I have been reading I fear I have probably ruined the geometry of my razors. But once the tax return comes back I may get a Norton 4000/8000. I see that is very popular hone.

One thing I can attest to from my experience is that letting the blade rest a couple days (or letting the fin grow or whatever you want to call it) makes a noticable difference. Also, you might be interested to know that I stupidly dropped my Hoffritz razor once and put a half moon chip right smack in the middle of the edge. It's a little more than 1mm deep too. But I still shave with it with no adverse consequences! I do have a beard so that makes it a little easier . I shave the top of my cheeks and most of my neck; although, there have been periods of time over the years where I have been clean shaven and used a SR then too. It just became too much work honing as I do and the razors needed it more often. But if I can finally learn how to properly hone up a nice edge, I might just keep the beard off.

One last note. I examined a Norton 4000/8000 at a local woodworking store. It seems much coarser than the surgical black I've been using??
My 8000 King is like glass compared to the Norton!?

I have no problems completely shaving with a SR and I love it, but I sure could use some honing instruction!!! I recently saw Brian Donofrio's videos, Lynn's too, and I plan on getting the DVD by that other guy that Lynn mentioned in his video.

Well, I think I've said enough for now. So what advice do you guys have for me?? Where do I start?